ENVIRONMENT POLLUTION 2

E — WASTE

E-waste is not hazardous if it is stocked in safe storage or recycled by scientific methods or transported from one place to the other in parts or in totality in the formal sector. The e-waste can be considered hazardous if recycled by primitive methods

Survey was carried out by the Central Pollution Control Board (CPCB) during 2005

In India, among top ten cities; Mumbai ranks first in generating e-waste followed by Delhi, Bangalore, Chennai, Kolkata, Ahmadabad, Hyderabad, Pune, Surat and Nagpur.

 

SOLID WASTE

the discarded (abandoned or considered waste-like) materials

does not include solid or dissolved materials in domestic sewage, or

solid or dissolved materials in irrigation return flows or industrial discharges0

Conventional plastics have been associated with reproductive problems in both humans and wildlife.

Dioxin (highly carcinogenic and toxic) by-product of the manufacturing process is one of the chemicals believed to be passed on through breast milk to the nursing infant.

Burning of plastics, especially PVC releases this dioxin and also furan into the  atmosphere.

Pyrolysis-It is a process of combustion in absence of oxygen or the material burnt under controlled atmosphere of oxygen. It is an alternative to incineration. The gas and liquid thus obtained can be used as fuels.

 

Waste Minimization Circles (WMC)

helps Small and Medium Industrial Clusters in waste minimization in their industrial plants.  assisted by the World Bank with the Ministry of Environment and Forests acting   as the nodal ministry.  being implemented with the assistance of National   Productivity Council (NPC), New Delhi.

aims to realise the objectives of the Policy Statement for Abatement of Pollution (1992), which states that the government should educate citizens about environmental risks, the economic and health dangers of resource degradation and the real economic cost of natural resources.

BIOREMEDIATION

the use of microorganisms (bacteria and fungi) to degrade the environmental contaminants into less toxic forms.

Phytoremediation

is use of plants to remove contaminants from soil and water .

Rhizofiltration

  • a water remediation technique that involves the uptake of contaminants by plant roots.
  • used to reduce contamination in natural wetlands and estuary areas.

 

ENVIRONMENTAL IMPACT ASSESSMENT

Notification on Environmental Impact Assessment (EIA) of developmental

projects 1994 under the provisions of Environment (Protection) Act, 1986 making EIA  mandatory for 29 categories of developmental projects. One more item was added to the list in January, 2000. environmental impact assessment statutory for 30 activities

Environment Impact Assessment Notification of 2006 has categorized the developmental projects  in two categories, i.e., Category A and Category B

Ministry of Environment & Forests

‘Category A’ projects are appraised at national level by expert appraisal committee

India has constituted the State Level Environment Impact Assessment Authority (SEIAA) and State Level Expert Appraisal Committee (SEAC)  to decentralize the environmental clearance process

The objective of EIA is to foresee and address potential environmental problems/  concerns at an early stage of project planning and design.

 

 

The EIA notification establishes four stages for obtaining Environmental Clearance.

  1. Screening
  2. Scoping and consideration of alternatives Baseline data collection
  3. Impact prediction
  4. Assessment of alternatives, delineation of mitigation measures and environmental impact statement
  5. Public hearing
  6. Environment Management Plan Decision making
  7. Monitoring the clearance conditions

Screening- It is only for Categories B

Screening Criteria are based upon:

  • Scales of investment; •       Type of development; and, •      Location of development

B1 Categories project require Environmental Impact Assessment while B2 category projects are exempted from EIA.

State Level Expert Appraisal Committee determine about project categories

Climate Change

 

  • It is the long term change in the statistical distribution of weather patterns over periods of time
  • Though it has been happening naturally for millions of years, in recent years it has accelerated due to anthropogenic causes and has been causing global warming.
  • UNFCCC defines climate change as – “a change of climate which is attributed directly or indirectly to human activitythat alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods”

 

Climate Change Mitigation

  • Alternative Energy sources
    • Renewable energy
    • Nuclear Power
    • Reduce the carbon intensity of fossil fuels
  • Energy efficiency and conservation
    • Transport and urban planning
    • Building design
    • Reforestation and avoid deforestation
    • Eliminating waste methane
  • Geoengineering
    • Greenhouse gas remediation
      • Biomass
      • Carbon air capture
      • Carbon capture and storage
    • Societal control
      • Population
      • Sustainable life-style

 

Structure, relief and physiographic divisions

 

Three Geological divisions:

  1. The peninsular block
  2. The Himalayas and other Peninsular Mountains
  3. Indo-Ganga-Brahmaputra Plain

 

  • Peninsualar block is made of gneisses (metamorphic) and granites (igneous).

Six physiographic divisions:

  1. The Northern and North-eastern Mountains
  2. The Northern Plain
  3. The Peninsular Plateau
  4. The Indian Desert
  5. The Coastal Plains
  6. The Islands

Northern and North-Eastern Mountains

Approximate length of the Great Himalayan range: 2500 KM. Width: 160-400 KM

Impact of Himalayas on the climate of India?

It can be divided into five sub-divisions:

  1. Kashmir (or Northwestern) Himalayas
  2. Himachal and Uttaranchal Himalayas
  3. Darjeeling and Sikkim Himalayas
  4. Arunachal Himalayas
  5. Eastern Hills and Mountains

Kashmir Himalayas

  • Ranges: Karakoram, Ladhakh, Zaskar, Pir Pinjal
  • Glaciers: Baltoro, Siachen
  • Passes: Zoji La (Great Himalayas), Banihal (Pir Pinjal), Photu La (Zaskar) and Khardung La (Ladakh)
  • Lakes: (freshwater) Dal and Wular; (saltwater) Pangong Tso and Tso Moriri
  • Pilgrimage: Vaishno Devi, Amarnath Cave, Charar-e-Sharif
  • They are also famous for Karewa formations which are useful for the cultivation of Zafran (a local variety of Saffron). Karewas are the thick deposits of glacial clay and other materials embedded with moraines.
  • Kashmir is located on the banks of Jhelum river.
  • Meanders is a typical feature associated with the rivers in this region.
  • In South, there are longitudinal valleys called duns; Jammu dun and Pathankot dun

 

Himachal and Uttarakhand Himalayas

  • Lies between rivers Ravi and Kali
  • Drained by two major river systems: Indus and Ganga
  • Northernmost part is an extension of the Ladakh desert, lies in Spiti.
  • Ranges: Great Himalayan Range, Lesser Himalayas (Dhaoladhar in HP and Nagtibha in Uttarakhand), Shivalik range
  • Pilgrimage: Gangotri, Yamunotri, Kedarnath, Badrinath, Hemkund Sahib and the five famous prayags (Refer to Panch Prayag)
  • Famous for hill stations: Dharamshala, Mussoorie, Shimla, Kaosani; Cantt.: Kasauli, Almora, Lansdowne, Ranikhet
  • The important distinguishing features of this area are the ‘Shivalik’ and ‘Dun formations’.
  • Important duns: Chandigarh-Kalka, Nalagarh, Dehra, Harike, Kota
  • Dehradun is the largest of all duns: Length – 35-45 KM, Width: 22-25 KM
  • Inhabited with the Bhotia They migrate to higher reaches (Bugyals) in summer and return to the valleys during winters.

 

Darjeeling and Sikkim Himalayas

  • Between Nepal Himalayas and Bhutan Himalayas.
  • Fast flowing rivers such as Tista
  • Peaks: Kanchenjunga
  • Tribe: Lepcha
  • Has a mixed population of Nepalis, Bengalis and tribals from Central India.
  • Importance: Due to the moderate slope, it is best suited for tea plantations. <India produces about 26 pc of tea in the world; second after China. Also, accounts for 12 pc of tea exports; fourth in the world.>
  • Duar formations are peculiar to this region.

 

Arunachal Himalayas

  • From Bhutan Himalayas to Diphu pass in the east.
  • Direction: Southwest to Northeast
  • Peaks: Kangtu and Namya Barwa
  • Rivers: Brahmaputra, Kameng, Subansiri, Dihang, Dibang and Lohit.
  • These rivers are perennial and have the highest hydro-electric power potential in the country.
  • Tribes: Monpa, Daffla, Abor, Mishmi, Nishi and Nagas
  • These communities practice shifting cultivation known as Jhumming.

 

Eastern Hills and Mountains

  • Direction: North to South
  • Ranges: Patkai Bum, Naga hills, Manipur hills, Mizo or Lushai hills
  • These are low hills
  • Tribes practice Jhum cultivation
  • Rivers: Barak. Most of the Nagaland rivers form a tributary of Brahmaputra. Rivers in eastern Manipur are the tributaries of Chindwin, which in turn is a tributary of the Irrawady of Myanmar.
  • Lake: Loktak
  • Loktak Lake: is an important lake in Manipur which is surrounded by mountains on all sides. It is the largest freshwater lake in northeastern India. Also called the only Floating Lake in the world due to floating masses of organic matter on it. It serves as a source for hydropower generation, irrigation and drinking water supply.
  • Keibul Kamjao National Park located in the Bishnupur district of Manipur is the only floating park in the world and is an integral part of the Loktak Lake. Home to the endangered Manipur Eld’s Deer or Brow-antlered Deer or Sangai or Dancing Deer.
  • Mizoram is also known as the ‘Molassis basin’ which is made up of soft unconsolidated deposits.

The Northern Plains

  • Formed by the alluvial deposits of rivers – Indus, Ganga and Brahmaputra.
  • Length: 3200 KM; Width: 150-300 KM

Three main zones:

  1. Bhabar
  2. Tarai
  3. Alluvial Plains (Khadar and Bangar)

Bhabar

  • Narrow belt. 8-10 KM wide.
  • Paralllel to Shivalik at the break-up of the slope. Hence, streams and rivers deposit heavy rocks (and at times disappear) in this zone.

Tarai

  • South of Bhabar. 10-20 KM wide.
  • Rivers re-emerge and create marshy and swampy conditions known as Tarai.

Alluvial Belt

  • South of Tarai.
  • Features of mature stage of fluvial erosional and depositional landforms such as sand bars, meanders, ox-bow lakes and braided channels. Riverine islands in Brahmaputra.
  • Brahmaputra takes a turn an almost 90 degree turn at Dhubri (Assam) before entering Bangladesh.

 

Peninsular Plateau

  • Bounded by the Delhi ridge, Rajmahal Hills, Gir range and Cardamom hills.
  • Made up of a series of patland plateaus: Hazaribagh, Palamu, Ranchi, Malwa, Coimbatore, Karnataka etc.
  • One of the oldest and most stable landmass of India.
  • Physiographic Features: Tors, block mountains, rift valleys, spurs, bare rocky structures, hummocky hills and quartzite dykes offering natural sites for water storage.
  • Black soil in western and northwestern parts.
  • Bhima fault in this region has frequent seismic activity (Lathur earthquake)
  • NW part also has ravines and gorges: Chambal, Bhind and Morena.

Three broad regions:

  1. Deccan Plateau
  2. Central Highlands
  3. Northwestern Plateau

Deccan Plateau

  • Bordered by Eastern Ghats, Satpura, Maikal range and Mahadeo hills
  • Important ranges: WG: Sahyadri, Nilgiri, Anaimalai and Caradamom hills; EG: Javadi hills, Palconda range, Nallamala Hills, Mahendragiri hills
  • EG and WG meet at Nilgiri hills.
  • Highest peak: Anaimudi (2695 m) on Anaimalai hills; Dodabetta (2637 m) on Nilgiri hills.
  • Rivers: Mahanadi, Godavari, Krishna, Kaveri etc.

Central Highlands

  • Bounded by the Aravali and Satpura range.
  • Relic mountains, highly denuded and form discontinuous ranges.
  • Near Jaisalmer it is covered by the longitudinal sand ridges and crescent-shaped sand dunes called barchans.
  • Elevation: 700-1000 m
  • Banas, a tributary of Chambal, originates in the Aravalli. Other tributaries of Yamuna originate from the Vindhyan and Kaimur ranges.
  • Minerals in Chotanagpur plateau.

 

Northeastern Plateau

  • Extension of the main Peninsular plateau.
  • Meghalaya and Karbi Anglong plateau.
  • Megahalaya plateau: Garo hills, Khasi hills and Jaintia hills (named after the tribals inhabiting the region)
  • Rich in minerals like coal, iron, sillimanite, limestone and uranium.
  • Receives maximum rainfall from SW monsoon. Hence, Meghalaya plateau has a highly eroded surface. Cherrapuni and Myswarnam.

 

Indian Desert

  • Aka Marusthali
  • Northwest of the Aravali hills
  • Dotted with longitudinal dunes and barchans.
  • Low rainfall: >150 mm per year Low vegetation cover
  • Evidence that this area was under the sea during the Mesozoic era.
  • Features: mushroom rocks, shifting dunes and oasis.
  • Rivers are ephemeral: Luni. Brackish lakes. Inland drainage.

 

Coastal Plains

Two divisions:

  1. Western coastal plains
  2. Eastern Coastal Plains

Western Coastal Plains

  • Submerged coastal plain. Hence, a narrow belt. Narrow in middle and broader towards north and south.
  • Ports: Provides natural conditions for the development of ports and harbours due to submergence. Kandla, Mazagaon (Mumbai), JLN port Navha Sheva, Maramagao, Mangalore, Cochin etc.
  • Mumbai has the world’s largest natural harbour.
  • May be divided into: Kachchh and Kathiawar coast in Gujarat, Konkan coast, Goan coast and Malabar coast.
  • Rivers don’t form delta.
  • Kayals (Backwaters): Found in the Malabar coast. Used for fishing and inland navigation. Every year Nehru Trophy Vallamkali (boat race) is held in Punnamada Kayal in Kerala.

 

Eastern Coastal Plains

  • Broader
  • Emergent coast. Hence, less number of ports and harbours. Chennai, Vizag, Paradwip, Haldia.
  • Delta formation

The Islands

Two major Divisions:

  1. Andaman and Nicobar
  2. Lakshwadeep & Minicoy

 

Andaman and Nicobar

  • Two major island groups: Ritchie’s archipelago and the Labrynth island.
  • The group is divided into: Andaman in the North and Nicobar in the South.
  • Andaman and Nicobar separated by the Ten Degree channel.
  • Barren Island
  • Peaks: Saddle Peak (N.Andaman – 738 m), Mt. Diavolo (Middle Andaman – 515 m), Mt. Koyob (S Andaman – 460 m) and Mt. Thuiller (Great Nicobar – 642 m)
  • Coral deposits found
  • Convectional rainfalls and equatorial type of vegetation.

Lakshadweep and Minicoy

  • Entire group built of coral deposits.
  • Total of 36 islands of which 11 are inhabited.
  • Smallest UT
  • Minicoy is the largest island
  • Separated by the 9 Degree Channel, north of which is the Amini Island and to the south Canannore island.
  • These islands have storm beaches consisting of unconsolidated pebbles, shingles, cobbles and boulders.

Social and Cultural Awakening

 

Raja Rammohan Roy:

RRM Roy was a social reformer and intellectual in the early nineteenth century Bengal. He is most widely known for founding the Brahmo Samaj and his relentless campaign against the practice of Sati and child marriage.

Debendranath Tagore:

Brahmo Samaj:

BS was founded in 1828 by Raja Ram Mohan Roy with the purpose of purifying Hinduism and to preach monotheism or belief in one God.

Greenhouse effect

 

The greenhouse effect is a natural process that warms the Earth’s surface. When the Sun’s energy reaches the Earth’s atmosphere, some of it is reflected back to space and the rest is absorbed and re-radiated by greenhouse gases. It is the process by which radiation from a planet’s atmosphere warms the planet’s surface to a temperature above what it would be without its atmosphere. If a planet’s atmosphere contains radioactively active gases (i.e., greenhouse gases) the atmosphere will radiate energy in all directions.

The greenhouse effect comes from molecules that are more complex and much less common. Water vapour is the most important greenhouse gas, and carbon dioxide (CO2) is the second-most important one. Methane, nitrous oxide, ozone and several other gases present in the atmosphere in small amounts also contribute to the greenhouse effect. In the humid equatorial regions, where there is so much water vapour in the air that the greenhouse effect is very large, adding a small additional amount of CO2 or water vapour has only a small direct impact on downward infrared radiation. However, in the cold, dry polar regions, the effect of a small increase in CO2 or water vapour is much greater. The same is true for the cold, dry upper atmosphere where a small increase in water vapour has a greater influence on the greenhouse effect than the same change in water vapour would have near the surface.

Green house effects changes are due to:-

  • Energy;
  •  Industry;
  •  Agriculture;
  •  Waste; and
  • Land Use Land Use Change

The Kushanas: Short introduction

 

In the early 2nd century BC, a tribe on the Central Asian frontier of China called Hsiung-nu defeated a neighboring one known as Yueh-chih. After more conflict, the survivors of the Yueh-chih were dislocated west, passing down the Ili river valley and along the southern shore of lake Issyk Kul. This movement also pushed Saka tribes (and others) ahead of them. Sometime between 145 and 125 BC, these nomad invaders burst into Bactria and Parthia. A generation later, they were pressing into the Kabul valley and onto the Punjab plain. At around the beginning of the Christian era, one of the five Yueh-chih chiefs, K’iu-tsiu-k’io, attacked and defeated the others, leaving his clan in control; the Kuei-shang (Kushans).

Kujula Kadphises (30-80 AD) established the Kushan dynasty in 78 AD by taking advantage of disunion in existing dynasty of Pahalava (Parthian) and Scytho-Parthians, and gradually wrested control of southern prosperous region, which is the northwest part of ancient India, traditionally known as Gandhara (now Pakistan). It was his grandson Vima Kadphises who made Kushan a paramount power of northern India. His reign saw emergence of Kushan empire when he conquored north-western India (modern Punjab). Soon he came under influence of Hinduism (most likley embraced it for good) and took opportunity to proclaim himself Mahishwara, another name for Lord Shiva, on his coins (Shiva is a prominent Hindu god). Kushan kings introduced gold and copper coins, a large number of them have survived till today. It was the Kushan emperor, Vima Kadaphises who introduced the first gold coins of india. Kushan empire covered north west of India (includes Pakistan and modern Afganistan) and northern India. Ample evidences of trade with China, cental Asia, Egypt and Rome are available which made their economy very strong and kingdom wealthy and prosperous.

Vima’s able son Kanishka (100 – 126 AD) followed and took control of this dynasty in 100 AD. Kanishka is the legendary ruler of ancient India and according to most historians the greatest ruler of Kushan dynasty. He and his descendents called themselves `Devputra’ which means son of god, who ruled Aryavarta, the India. He established an era, commonly known as Shaka era, starts from 78 AD. Shaka era is still in use in India. Kanishka’s empire consisted Bactria (modern Afghanistan), part of central Asia (Tajikistan), north-western India (modern Pakistan) and Northern India till Pataliputra or Patana. Kushan empire.

Huvishka succeeded Kanishka I. He was founder of a city Hushka in Kashmir named after him (described by Kalhan in Rajatarangini). Kushana empire was at its zenith during Kanishka’s and Huvishka’s reign. After Huvishka’s reign, Vasudeva I took control of this dynasty which by then had lost control over regions beyond Bactria or perhaps the Bactria itself. The Kushan dynasty had been totally assimilated in Indian culture. Vasudeva I was the last great king of the dynasty when Kushana empire was at it’s height of splendor and prosperity.

Kushan empire had started its decline soon after Vasudeva’s death. Vasudeva was followed by his son Kanishka II who lost all the territories west of river Indus to Sassanians. Vasudeva II, Vashishka, and Shaka are the kings who followed after the Kanisha II. After Vashishka the Kushan empire had completly disintegrated into few small kingdoms. By fourth century AD this dynasty went into total obscurity with advent of mighty Gupta emperors.

 

Kanishka:

His Date:

There is a sharp controversy about Kanishka’s date centering round two points:

(1) Whether the Kanishka group preceded or succeeded the Kadphises group, and

(2) Whether Kanishka started his rule in 78 A.D. or later or earlier.

(1) Cunningham was the first writer to sponsor the theory that Kanishka’s era started from 58 B.C. which came to be known after­wards as Vikrama Samvat: Cunningham, however, gave up this theory later on, but Fleet and after him Kennedy held this view with all ear­nestness. As a corollary of the above contention it follows that Kanishka group of kings preceded Kadphises group of kings.

But on a careful analysis of the archaeological and numismatic evidences scholars have come to the conclusion that there can be no doubt that the Kanishka group of kings did not precede but followed the Kadphises group of kings.

In support of this view scholars point out if the series of coins issued successively by alien rulers of India upto Vasudeva-I, are care­fully studied it will be evident that the coins of the Kadphises kings were issued immediately after those of the Sakas and the Parthians.

Again, the coins of Kanishka and Huvishka, although differ in some details, they seem to be largely prototypes of Wima Kadiphises.

It must also be noted that the practice of issuing bilingual and by scriptural coins introduced by the Indo-Greek kings was continued throughout the Saka-Pahlava period upto the time of Kadphises. The continuity of the practice without break till the time of Wima Kadphises was broken only at the time of Kanishka who gave up the practice of issuing bilingual coins.

The legend of his coins was Greek but most of them were not, however, in Greek. Hurishka and Vasudeva followed the practice of Kanishka. Thus we find that while there was a continuity in the method of the striking coins followed upto Wima Kadphises from the line of the Indo-Greeks a different method was followed and continued by Kanishka and his successors. These two different sequences when compared leave no doubt that the Kushana group followed Kadphises group of kings.

Turning to the second point, we find that scholars like Sir John Marshall, Sten Konow, Vincent Smith, Van Wijk and some other scholars are of the opinion that Kanishka began his rule in the first quarter of the second century A.D., sometime between 125 to 128 A.D. which lasted for about a quarter of a century.

But Ferguson had held long before that Kanishka started his first regional year in 78 A.D. and inaugurated an era from that date which came to be known as the Saka era (Sakabda) which is still current in different parts of India. Ferguson’s view has been supported by scholars like Oldenberg, Thomas, Rapson, R. D. Banerjee, Dr. Raichaudhuri and others. One of the latest scholars to support the view that Kanishka started his rule in 78 A.D. which was also the beginning of an era is Van Lohuizen-de Leeuw.

It has been argued against the above view held by most of the scholars, that if we agree that Kadphises-I reigned about 50 A.D. and Kanishka about 78 A.D. then we are left with only 28 years roughly for the two reigns of Kadphises-I and Kadphises-II which is a very short span for two reigns. But when we remember that Kadphises died at the age of eighty, his son Kadphises-II must have ascended the throne at pretty old age. This makes accession of Kanishka in 78 AD. quite tenable.

Marshall, Sten Konow and others who are of the opinion that Kanishka ruled in the first quarter of the second century A.D. is- directly against the evidence of Junagarh inscription of Rudradamana. Dr. Raichaudhuri draws our attention to the fact that it is clearly mentioned in the Junagarh inscription that Rudradamana held sway over the lower Sindhu region in the first half of the second century A.D.

The South Bihar (Sui-Bihar) inscription of Kanishka mentions lower Sindhu area as within the dominions of Kanishka. Obviously, both Rudradamana and Kanishka were not rulers over the same region simultaneously. This proves the untenability of the view that Kanishka ruled in the second century A.D. There is also no evidence to show that there was the inauguration of any era in the second century A.D.

Dr. Majumdar’s contention that Kanishka was the founder of Traikutaka-Kalachuri-Chedi era of 248-249 A.D. is absolutely unten­able in view of the Chinese evidence that An-Shi-Kao who lived dur­ing the second century A.D. translated a work Margabhumi-sutra written by Sangharaksha, chaplain of Kanishka. This precludes plac­ing Kanishka in the third century A.D. as Dr. R. C. Majumdar has done. Dr. R. G. Bhandarkar’s view that Kanishka ascended the throne in 278 A.D. is untenable on the same grounds.

Thus most of the scholars are of the view that Kanishka started his rule in 78 A.D. which was also the year from which the Saka era is counted.

It has been contended by some scholars that if the era was found­ed by Kanishka why should it have been named Saka era and not Kushana era, after all the Kushanas were not Sakas. But it may be pointed out that the close association of the Yue-chi people of which the Kushanas were a branch, with the Saka-Pahlava made them a com­posite people with a composite culture in which the contributions of the Sakas was quite large.

Further, the Kushanas were not Greeks but some of Kanishka’s coins bore Greek legend on them. It is therefore no conclusive argument to say that since the era was called Saka era Kanishka could not be its founder. Likewise the contention that the Saka era was not followed in northern India although Kanishka was a ruler of the north is untenable.

Facts are, however, otherwise. This era was abandoned temporarily during the Gupta rule when it was confined to the south where its use was spread by the Jainas. But with the end of the Gupta rule the Saka era came back into use and Continues to be used even today in different parts of India.

Thus after an analysis of evidences, literary, numismatic as well as epigraphic, the balance of arguments remains in favour of placing the Kanishka group of kings after the Kadphises group of kings and fixing 78 A.D. as the starting point of Kanishka’s rule, and also the beginning of the era known as Saka era or Sakavda.

His Conquests: Extent of His Empire:

Kanishka was alone among the Kushana kings who has left a name cherished by tradition and famous in India as well beyond her limits.

At the time of accession to the throne Kanishka’s empire compris­ed Afghanistan, large part of Sindhu, portions of Parthia and the Punjab. He appears to have not forgotten to avenge the defeat of his predecessor Kadphises at the hands of the Chinese general Pan-chao. He also played the part of a conqueror in the early years of his reign. Dr. Smith credits him with the conquest and annexation of the Kashmir Valley. He certainly showed, remarks Smith, a marked preference for that delightful country.

Here he erected nume­rous monuments and founded a town, which although now reduced to a petty village, still bears his honoured name. We have, however, no details about the war with the king of Kashmir. Rajatarangini refers to three kings Hushka, Jushka and Kanishka who are described as decendants of Turuksha ruler and were given to acts of piety and built monasteries, Chaityas and similar other structures.

According to tradition Kanishka penetrated into the interior of India and attacked Pataliputra, the capital of Magadha. It is said that he carried away Asvaghosh, a Buddhist tradition, after the capture of Pataliputra and Buddhist Philosopher Asvaghosa fell into the hands of Kanishka who took the saga with him. Asvaghosa was in­deed one of the luminaries that graced the court of Kanishka. We may, therefore, conclude that at least a part of Magadha including Pataliputra was conquered by Kanishka.

Kanishka seems to have waged war against the western Satraps of Ujjaini. Numismatic evidence proves the inclusion of Malwa in his empire. Sylvan Levi, D. C. Sircar and Rapson suggest that the western Satrap Nahapana who ruled over Kathiawar, Malwa and Sourashtra had been a vassal of Kanishka. Some scholars hold that it was Chastana who was defeated by Kanishka and was compelled to hand over a part of Malwa to him.

According to Dr. Smith, Kanishka also waged war against the Parthians. Kanishka also con­quered Kashgarh, Khotan and Yarkhand. He is credited with defeat­ing the Chinese and thereby avenging the defeat of his predecessor Kadphises II at the hands of the Chinese general Pan-chao and com­pelled the Chinese to surrender hostages to him.

From the Chinese source as also from Buddhist traditions we come to know Kanishka conquered Kajangal in the Rajmahal hills in Bengal, some parts of Malda, Murshidabad, Bogra, Midnapur, etc. But in absence of any other evidences to support the indirect evidence furnished by the find spots of the coins of Kanishka it is difficult to come to any definite conclusion with regard to the inclusion of Bengal in Kanishka’s empire.

Kanishka’s empire comprised vast tacts of land extending from Afghanistan, and Khotan, Yarkhand, Kashgarh, etc. in Central Asia to Benares, and perhaps to parts of Bengal. His empire included Gandhara, Peshawar, Oudh, Pataliputra, Mathura. Inclusion of Kashmir is borne out by both the Chinese and Buddhist evidences. The western Satrapies seem to have been under his suzerainty.

Ac­cording to Hiuen TSang Kanishka Raja of Gandhara in old days having subdued all the neighbouring provinces and brought into obe­dience the people of distant countries, governed by his army a wide territory even to the east of the Tsung-ling mountains. All this proves that Kanishka’s sway extended beyond the borders of India.

The Buddhist tradition and Kanishka’s own inscriptions are ample testimony to the vast expanse of his dominions within India. Selec­tion of Purushapura, i.e. Peshawar, proves that Kanishka’s imperial possessions spread far towards the west and north.

 

Administration:

Kanishka was a mighty conqueror, but no less was his ability as an administrator and he was even mightier in peaceful pursuits and in his solicitousness of the welfare of the people. For an effective and efficient rule of the empire he resorted to the system of Satrapies and appointed Mahakshatrapa Kharapallana and Kshatrapa Vanaspara in the eastern part of the empire.

The northern part was ruled by Gene­ral Lala as Mahakshatrapa with Vaspasi and Laika as Kshatrapas. The seat of the Central Government was at Purushpura or Peshawar. This practice of rule through Great Satraps and Satraps was the con­tinuation of the system followed by the Sakas and the Pahlavas.

We find a conscious emulation of the methods of Asoka by the Kushana king Kanishka. He pursued the policy of propagating Bud­dhism both within India and outside India. It was in connection with his missionary activities that he established close relationship, religious cultural and commercial, not only with China, Tibet and Central Asia but also with Rome and influx of gold from China and Rome in parti­cular. The prosperity of the empire attested by the fine gold coins struck by Kadphises I appears to have increased under Kanishka. The unmistakable influence of Rome on the Indian coinage of the time could be noticed.

From the Periplus we know that gold and silver specie constituted one of the imports of Barygaza, i.e., Borach, a port on the eastern sea board of India. Swell has also mentioned to huge hoard of Roman coins of the first five Roman emperors discovered in the Madras Presidency. The very name dinara of gold coins seems to have close affinity with the Roman denarius and drama for silver coins has been adopted from the Greek drachma.

Kanishka assumed epithet like Shaonaus Shoo, as found on his coins, was an adaptation of the Parthian title Basileos Basileon. From Shaonaus Shoo the letter Shaahan Sha was derived.

Religion:

As it is customary for the Buddhist writers to depict a person wicked before conversion and turned into saint after conversion to Buddhism. Kanishka has been described by them to be devoid of the sense of right or wrong before his conversion. This view of the Buddhist writers has not been accepted by most of the scholars who think that it is an attempt on the part of the Buddhist writers to glorify Buddhism.

Before conversion to Buddhism Kanishka was a believer in many gods, Persian, Greek, Hindu, etc. This is proved by the figures imprinted on his coins. The exact date of conversion of Kanishka is, however, not known. The conversion is supposed to have taken place after some years he had been on the throne. It is supposed that after his association with the Buddhist philosopher and Saint Asvaghosha, he must have come under his influence.

Asvaghosha must have won the heart of Kanishka so completely that the latter gave up his alle­giance to his previous gods and got converted to Buddhism. Here is a second instance of a great conqueror and emperor being converted to Buddhism and taken to the policy of peace and brotherliness in place of the policy of military conquests.

Kanishka was a close copy of Asoka. What is specially noteworthy about Kanishka is that he was the only foreigner who became a con­vert to an Indian religion and turned into zealous missionary. In his missionary activities we find him to an emulator of Asoka whose foot­steps he tried to follow closely.

We renovated the old monasteries which were in a state of disrepair and built many a new one. He endowed the monasteries with liberal money grants for the maintenance of the monks who dwelt in them. Kanishka caused the construction of a number of stupas in the memory of Sakyamuni.

He also sent missionaries for the propagation of Buddhism to China, Tibet, Japan and Central Asia. The sculptors, painters, as well as the architects of his time also became active propagandists of Buddhism. The celebrated Chaitya it Peshawar constructed under his orders excited the wonder and appreciation of travellers down to a late period and famous sculp­tures therein included a life-size statue of himself.

During his time there arose disputes about Buddhism, among 18 schools of Buddhism prevalent at that time, as we know from the Tibetan historian Taranath. It became necessary to restore the dis­putes and to that end Kanishka convoked the Fourth Buddhist Coun­cil to which was attended by 500 monks.

There is a controversy with regard to the venue of the Council. According to some it was held at Kundavana in Kashmir but others hold that it met at Jullundur in the Punjab. In the Council the entire Buddhist literature was thoroughly examined and commentaries on the three Pitakas were prepared, which were compiled in Mahavibhasha which is the greatest work on Bud­dhist Philosophy.

This voluminous work is considered to be the encyclopaedia of Buddhism. The decisions of the Council were ins­cribed in copper plates and deposited in a stupa built for the pur­pose, packed in stone chests. Vasumitra acted as the President and Asvaghosha as the Vice-President of the Council.

 

Buddhist Council:

The period of Kanishka saw the transformation of the Hinayana form of Buddhism into Mahayana form. In the Hinayana form the worship of Buddha was only by relics like footprint of Buddha, an empty seat of Buddha, that is, some sort of symbol used to be placed in front of the worshipper.

There used to be no figure or image of Buddha to worship. This needed great concentration of mind on the part of the worshipper and the method was very subtle and could be followed by persons of great self-control, and of deepest religious bent of mind. This method of proceeding along the Path of Buddhist reli­gion was called Hina-Yana, i.e., lesser vehicle, i.e., subtle mode of trans­port in the path of religion.

But during Kanishka’s time worship of the image of Buddha came into use. It became easy to concentrate by keeping as visible representation of Buddha in form. This was a greater and easier method hence called Mahayana Buddhism. In the Hinayana form of worship emphasis was laid on good action but in Mahayana system worship of Buddha and Bodhisattvas was emphasis­ed. The use of Pali as the language of the Buddhist religious books was now replaced by Sanskrit.

Art and Learning:

Kanishka’s patronage of art and learning marked the beginning of a cultural renaissance which was to reach its peak and flower under the Guptas A large volume of Sanskrit literary works both religious and secular, was produced during the period. Asvaghosha, the great­est Buddha Philosopher, saint and literary figure of the time adorned the court of Kanishka.

He was a versatile genius whose contributions to the cultural life of the time centred round poetry, philosophy, drama, music. Buddhacharit and Sutralankar are his two most famous works. Buddhacharit on the life of Gautama Buddha in Sanskrit verse has been regarded as a Buddhist epic. Another great Buddhist writer of fame who adorned the court of Kanishka was Nagarjuna. He was the greatest exponent of Mahayana Buddhism.

Charaka, the celebrated master of the science of medicine, was the court physician of Kanishka. Mathara, a politician of great acumen, was a minister of Kanishka. Be­sides these worthies, the Greek engineer Agesilaus and many others played a leading part in the religious, literary, scientific, philosophical and artistic activities of the reign. It is of great interest to know that Nagarjuna in his celebrated work Madhyamikasutra expounded the theory of relativity in its preliminary form.

Another celebrity that adorned the court of Kanishka was Vasu­mitra who presided over the Fourth Buddhist Council held during the reign of Kanishka.

Kanishka was also a great builder and a patron of art and archi­tecture. The works of architecture, art of sculpture of his time are found in Mathura, Peshawar, Taxila and Amaravati. The Sirsukh city in Taxila with its hall, buildings and monasteries was built by him. Statues, sculptures, monasteries added to the beauty of the city.

The Gatidhara School of art was the product of Graeco-Roman-Buddhist school of art and sculpture. Totally indigenous art also flourished during his reign at Amaravati. The ornamental sculpture depicted in the Amaravati medallion bear testimony to the excellence of purely Indian style uninfluenced by any foreign art. At Mathura find of Kanishka’s headless statue is an example of the massive sculptural art of the time.

Estimate of Kanishka:

Kanishka happens to be one of the few kings in history who came in as a conqueror and won an empire but was conquered by the religion, language and culture of the country of his conquest. He was an intrepid warrior, a mighty conqueror but what was more he was equally great as an administrator. If he was great in war and administration he was greater still in the arts of peace.

He was a great patron of art and literature. He built a vast empire which ex­tended from Central Asia to Mathura, Benares and probably to parts of Bengal but he gave it an administration which brought peace and prosperity to the country and the people, which conduced to pursuit of religion, art, architecture and literature. Before his conversion to Buddhism he was eclectic in his religious belief and was a polytheist.

After becoming a Buddhist he became an ardent missionary of the Mahayanism. He rendered a great service to Buddhism by convening the Fourth Buddhist Council which resolved the disputes that arose among the Buddhists about Buddhist religion. He was a great patron of Buddhism as his predecessor of the Maurya Dynasty Asoka. Like Asoka he sent missions for propagation of Buddhism in China, Japan, Tibet, Central Asia, etc.

He patronized the Buddhist philosophers like Asvaghosha, Basumitra, Nagarjuna, Political scientist like Mathara, medical scientist like Charaka, and engineer like Greek Agesilaus.

He was a great patron of art and architecture. The city of Purushapura, his capital, Taxila, Mathura were beautified by monas­teries, stupas, etc. The tall Chaitya at his capital with its sculpture forced the admiration of visitors even after long time.

The beneficence of his rule was seem in the prosperity of the people resulting from the influx of huge quantity of gold by way of trade with foreign countries like China, Rome, etc.

Kanishka has been likened to Asoka as a conqueror, preacher. But although he was definitely a lesser personality than Great Asoka, he was the nearest emulator of Asoka in his spirit of toleration of other religions, patronage of Buddhism, and missionary zeal. He, how­ever, was not an apostle of non-violence as Asoka had been yet he had initiated a cultural renaissance which reached its zenith under the Guptas.

Kanishka’s reign constituted a brilliant epoch in the his­tory of ancient India and the darkness that descended on the Indian History after the fall of the Mauryas was lifted during his reign. Kanishka rightly deserves a place among the best rulers of the ancient history of India.

Art, Sculpture and Architecture in Kushana Empire

The Kushana period witnessed a remarkable development in art, sculpture and architecture. The Gandhara School of Art and Sculp­ture marked a happy blending of the Graceo-Romano-Buddhist style and techniques. The distinguishing features of the Gandhara Sculp­ture owed their origin to Greek and Roman styles yet the art essen­tially was Indian in spirit. The Gandhara artists had the hand of a Greek but the heart of an India.

The most remarkable contribu­tion of the Gandhara School of art is to be seen in the evolution of the image of Buddha, perhaps in imitation of the Greek God Apollo. Images of Buddha and Bodhisatva illustrating the past and present lives of Buddha were executed in black stone. The figures show an excellent idea of human anatomy that swayed the artists.

These works of art offer a striking contrast to similar art that we witness else­where in India. The smooth round features of the idealised human figures, draped in transparent and semi-transparent cloth closely fit­ting to the body and revealing its outline were due to the influ­ence of the Hellenistic art of Asia Minor and the Roman Empire.

The images of Buddha pertaining to the Gandhara school cen­tres of which were Gandhara, Jalalabad, Hadda and Baniyan in Afghanistan, Peshawar and Swat Valley, were more animated and anatomically perfect than those found in other parts of India. While the former are more beautiful physically and accurate in anatomical details as such more realistic, the Indian art and sculpture which pro­duced the images of Buddha were more idealistic giving a spiritual and sublime expression to the images.

The technique of the Gan­dhara School of art of the Kushana period spread through China to the Far East and influenced the art of China and Japan. The Gandhara art, according to V. A. Smith, was based on the cosmopolitan art of the Asia Minor and the Roman Empire.

There were also purely Indian schools of art in India during the period of the Kushanas. There were the schools of art at Amaravati, Jagayyapeta and Nagarjunikonda. In the Amaravati human figures are characterised by slim, blithe features and have been repre­sented in most difficult poses and curves. The technique of art reach­ed a high standard of development. Plants and flowers, particularly lotuses, have been represented in the most perfect, lifelike manner.

Two Chaityas and a Stupa discovered at Nagarjunikonda are the relics of the indigenous school of art and show a high standard of development. The limestone panel of figures depicting the nativity of Buddha is an excellent piece of sculpture of the Kushana period which was entirely indigenous.

Architecture of the Kushana period was not so remarkable as the sculpture of the period. There were beautiful temples, monas­teries, Stupas which indicate considerable development during the period although the technique of architecture did not attain the standard of excellence of sculpture. The famous tower of Kanishka at Purushapura (Peshawar) was one of the wonders of the world. Much of the architectural specimens of the period perished with time.

Caves hewn in solid rock with pillars and sculptures, hundreds of which have been found in different parts of the Kushana Empire show a great improvement upon the technique of excavation that was in use during the time of Asoka. A Chaitya with rows of columns on two sides was a fine work of art of sculpture and architecture. The Chaitya at Karle is an excellent illustration.

Fa-hien who visited India during the rule of Chandragupta II {5th century) was struck with wonder to find a large number of Stupas, dagobas (small stupa), Chaityas and images of Buddha carved out of stone during the Kushana period.

There has been a sharp difference of opinion about the celebrity, and the extent of influence of the Gandhara art upon the Indian art during the reign of the Kushanas. Modern scholars think that the Gandhara School of sculpture has attained a celebrity perhaps beyond its merits.

According to some European scholars, the Gandhara School of art was the only school in Ancient India which can claim a place in the domain of art. There are others who are of the opinion that the source of subsequent development of Indian art as well as of the Far East was the Gandhara School of art which developed as a result of a happy blending of the Graco-Romano-Buddhist art.

But despite the foreign influence upon the school of Gandhara art, scholars like Havell, Will Durant, R. C. Majumdar and others are of the opinion that the influence, Hellenistic and Roman, upon the Indian art which was the Gandhara School of art was technical but spirit and the subject matter of the art was purely Indian.

  1. D. Banerjee’s view that the Gandhara art influenced the Indian art for nearly five centuries to follow is untenable on the ground that there were indigenous schools of art at Ainaravati, Nagarjunkonda, etc. where there was no influence of Gandhara School of art. The influence of the Gandhara art failed to penetrate into the interior of India and had no influence on the later development of the Indian, art. But the Gandhara School of art achieved a grand success in. becoming the parent of the Buddhist art of Eastern and Chinese Turkestan, Mongolia, China, Korea and Japan.

Literature:

The Kushana period witnessed a remarkable development of literature and Sanskrit language. Under the patronage enjoyed by the scholars and Buddhist philosophers of the time a massive develop­ment in secular and religious literature took place. A large number of standard works in Sanskrit language were written during the period.

Asvaghosha’s Buddhacharita, Saudarananda Kavya, Vajrasuchi, Sariputta Prakarana, Vasumitra’s Mahabibhasa—regarded as the Bud­dhist encyclopaedia, Nagarjuna’s Madhyamika-Sutra in which the theory of relativity was propounded, Charaka’s work on medicine, etc. contributed to the fund of human knowledge. Under the Kushanas the royal court became a seat of luminaries mentioned above as also of the Political Scientist Mathara, Greek engineer Agesilaus, etc.

Judicial Review

The Judiciary plays a very important role as a protector of the constitutional values that the founding fathers have given us. They try to undo the harm that is being done by the legislature and the executive and also they try to provide every citizen what has been promised by the Constitution under the Directive Principles of State Policy. All this is possible thanks to the power of judicial review.

 

All this is not achieved in a day it took 50 long years for where we are right now, if one thinks that it is has been a roller coaster ride without any hindrances they are wrong judiciary has been facing the brunt of many politicians, technocrats, academicians, lawyers etc. Few of them being genuine concerns, and among one of them is the aspect of corruption and power of criminal contempt. In this paper I would try to highlight the ups and downs of this greatest institution in India.

 

 

 

The rule of law is the bedrock of democracy, and the primary responsibility for implementation of the rule of law lies with the judiciary.1 This is now a basic feature of every constitution, which cannot be altered even by the exercise of new powers from parliament. It is the significance of judicial review, to ensure that democracy is inclusive and that there is accountability of everyone who wields or exercises public power. As Edmund Burke said: “all persons in positions of power ought to be strongly and lawfully impressed with an idea that “they act in trust,” and must account for their conduct to one great master, to those in whom the political sovereignty rests, the people”.2

 

 

 

India opted for parliamentary form of democracy, where every section is involved in policy-making, and decision taking, so that every point of view is reflected and there is a fair representation of every section of the people in every such body. In this kind of inclusive democracy, the judiciary has a very important role to play. That is the concept of accountability in any republican democracy, and this basic theme has to be remembered by everybody exercising public power, irrespective of the extra expressed expositions in the constitution.3

 

 

 

The principle of judicial review became an essential feature of written Constitutions of many countries. Seervai in his book Constitutional Law of India noted that the principle of judicial review is a familiar feature of the Constitutions of Canada, Australia and India, though the doctrine of Separation of Powers has no place in strict sense in Indian Constitution, but the functions of different organs of the Government have been sufficiently differentiated, so that one organ of the Government could not usurp the functions of another.4

 

The power of judicial review has in itself the concept of separation of powers an essential component of the rule of law, which is a basic feature of the Indian Constitution. Every State action has to be tested on the anvil of rule of law and that exercise is performed, when occasion arises by the reason of a doubt raised in that behalf, by the courts. The power of Judicial Review is incorporated in Articles 226 and 227 of the Constitution insofar as the High Courts are concerned. In regard to the Supreme Court Articles 32 and 136 of the Constitution, the judiciary in India has come to control by judicial review every aspect of governmental and public functions.5

 

 

 

Extent of Judicial Review in India:

 

The initial years of the Supreme Court of India saw the adoption of an approach characterised by caution and circumspection. Being steeped in the British tradition of limited judicial review, the Court generally adopted a pro-legislature stance. This is evident form the rulings such as A.K. Gopalan, but however it did not take long for judges to break their shackles and this led to a series of right to property cases in which the judiciary was loggerhead with the parliament. The nation witnessed a series of events where a decision of the Supreme Court was followed by a legislation nullifying its effect, followed by another decision reaffirming the earlier position, and so on. The struggle between the two wings of government continued on other issues such as the power of amending the Constitution.6 During this era, the Legislature sought to bring forth people-oriented socialist measures which when in conflict with fundamental rights were frustrated on the upholding of the fundamental rights of individuals by the Supreme Court. At the time, an effort was made to project the Supreme Court as being concerned only with the interests of propertied classes and being insensitive to the needs of the masses. Between 1950 and 1975, the Indian Supreme Court had held a mere one hundred Union and State laws, in whole or in part, to be unconstitutional.

 

After the period of emergency the judiciary was on the receiving end for having delivered a series of judgments which were perceived by many as being violative of the basic human rights of Indian citizens 7and changed the way it looked at the constitution. The Supreme Court said that any legislation is amenable to judicial review, be it momentous amendments8 to the Constitution or drawing up of schemes and bye-laws of municipal bodies which affect the life of a citizen9. Judicial review extends to every governmental or executive action – from high policy matters like the President’s power to issue a proclamation on failure of constitutional machinery in the States like in Bommai case, to the highly discretionary exercise of the prerogative of pardon like in Kehar Singh case  or the right to go abroad as in Satwant Singh case.Judicial review knows no bounds except the restraint of the judges themselves regarding justifiability of an issue in a particular case.

 

Judicial Review of Political Questions:

 

In the initial stages of the judicial adjudication Courts have said that where there is a political question involved it is not amenable to judicial review but slowly this changed, in Keshavananda Bharathi’s case,10 the Court held that, “it is difficult to see how the power of judicial review makes the judiciary supreme in any sense of the word. This power is of paramount importance in a federal constitution…. Judicial Review of constitutional amendments may seem involving the Court in political question, but it is the Court alone which can decide such an issue. The function of Interpretation of a Constitution being thus assigned to the judicial power the State, the question whether the subject of law is within the ambit of one or more powers of the legislature conferred by the constitution would always be a question of interpretation of the Constitution.”

 

Than it was in Special Courts Bill, 1978, In re, case where the majority opined that, “The policy of the Bill and the motive of the mover to ensure a speedy trial of persons holding high public or political office who are alleged to have committed certain crimes during the period of emergency may be political, but the question whether the bill or any provisions are constitutionally invalid is a not a question of a political nature and the court should not refrain from answering it.” What this meant was that though there are political questions involved the validity of any action or legislation can be challenged if it would violate the constitution. This position has been reiterated in many other cases11 and in S.R. Bommai’s case the Court held, “though subjective satisfaction of the President cannot be reviewed but the material on which satisfaction is based open to review…” the court further went on to say that, “The opinion which the President would form on the basis of Governor’s report or otherwise would be based on his political judgment and it is difficult to evolve judicially manageable norms for scrutinizing such political decisions. Therefore, by the very nature of things which would govern the decision-making under Article 356, it is difficult to hold that the decision of the president is justiciable. To do so would be entering the political thicker and questioning the political wisdom which the courts of law must avoid. The temptation to delve into the President’s satisfaction may be great but the courts would be well advised to resist the temptation for want of judicially manageable standards. Therefore, the Court cannot interdict the use of the constitutional power conferred on the President under Article 356 unless the same is shown to be male fide.”

 

As Soli Sorabjee points out, “there is genuine concern about misuse by the Centre of Article 356 on the pretext that the State Government is acting in defiance of the essential features of the Constitution. The real safeguard will be full judicial review extending to an inquiry into the truth and correctness of the basic facts relied upon in support of the action under Article 356 as indicated by Justices Sawant and Kuldip Singh. If in certain cases that entails evaluating the sufficiency of the material, so be it.”

 

What this meant was the judiciary was being cautious about the role it has to play while adjudicating matters of such importance and it is showing a path of restraint that has to be used while deciding such matters so that it does not usurp the powers given by the Constitution by way of the power of review at the same it is also minimizing the misusing of the power given under Article 356 to the President.

 

Judicial Review as a part of the Basic Structure:

 

In the celebrated case of Keshavanda Bharathi v. State of Kerela, the Supreme Court of India the propounded the basic structure doctrine according to which it said the legislature can amend the Constitution, but it should not change the basic structure of the Constitution, The Judges made no attempt to define the basic structure of the Constitution in clear terms. S.M. Sikri, C.J mentioned five basic features:

 

  1. Supremacy of the Constitution. 2. Republican and democratic form of Government. 3. Secular character of the Constitution. 4. Separation of powers between the legislature, the executive and the judiciary. 5. Federal character of the Constitution.

He observed that these basic features are easily discernible not only from the Preamble but also from the whole scheme of the Constitution. He added that the structure was built on the basic foundation of dignity and freedom of the individual which could not by any form of amendment be destroyed. It was also observed in that case that the above are only illustrative and not exhaustive of all the limitations on the power of amendment of the Constitution. The Constitutional bench in Indira Nehru Gandhi v. Raj Narain (1975 Supp SCC 1.) held that Judicial Review in election disputes was not a compulsion as it is not a part of basic structure. In S.P. Sampath Kumar v. Union of India((1987) 1 SCC 124 at 128.), P.N. Bhagwati, C.J., relying on Minerva Mills Ltd. ((1980) 3 SCC 625.) declared that it was well settled that judicial review was a basic and essential feature of the Constitution. If the power of judicial review was absolutely taken away, the Constitution would cease to be what it was. In Sampath Kumar the Court further declared that if a law made under Article 323-A(1) were to exclude the jurisdiction of the High Court under Articles 226 and 227 without setting up an effective alternative institutional mechanism or arrangement for judicial review, it would be violative of the basic structure and hence outside the constituent power of Parliament.

 

In Kihoto Hollohan v. Zachillhur (1992 Supp (2) SCC 651, 715, para 120) another Constitution Bench, while examining the validity of para 7 of the Tenth Schedule to the Constitution which excluded judicial review of the decision of the Speaker/Chairman on the question of disqualification of MLAs and MPs, observed that it was unnecessary to pronounce on the contention whether judicial review is a basic feature of the Constitution and para 7 of the Tenth Schedule violated such basic structure.

 

Subsequently, in L. Chandra Kumar v. Union of India ((1997) 3 SCC 261) a larger Bench of seven Judges unequivocally declared:

 

“that the power of judicial review over legislative action vested in the High Courts under Article 226 and in the Supreme Court under Article 32 of the Constitution is an integral and essential feature of the Constitution, constituting part of its basic structure”.

 

Though one does not deny that power to review is very important, at the same time one cannot also give an absolute power to review and by recognizing judicial review as a part of basic feature of the constitution Courts in India have given a different meaning to the theory of Check’s and Balances this also meant that it has buried the concept of separation of powers, where the judiciary will give itself an unfettered jurisdiction to review any thing every thing that is done by the legislature.

 

Expansion of Judicial Review through Judicial Activism:

 

After the draconian exposition of power by the Executive and the Legislature during Emergency the expectations of the public soared high and the demands on the courts to improve the administration by giving appropriate directions for ensuring compliance with statutory and constitutional prescriptions. Likewise the judiciary has taken an activist view the Beginning with the Ratlam Municipality case 12the sweep of Social Action Litigation13 had encompassed a variety of causes14.

 

With the interpretation given by it in Menaka Gandhi case the Supreme Court brought the ambit of constitutional provisions to enforce the human rights of citizens and sought to bring the Indian law in conformity with the global trends in human-rights-jurisprudence. This was made possible in India, because of the procedural innovations with a view to making itself more accessible to disadvantaged sections of society giving rise to the phenomenon of Social Action Litigation/Public Interest Litigation15. During the Eighties and the first half of the Nineties, the Court have broken there shackle’s and moved much ahead from being a mere legal institution, its decisions have tremendous social, political and economic ramifications. Time and again, it has sought to interpret constitutional provisions and the objectives sought to be achieved by it and directed the executive to comply with its orders.

 

SAL, a manifestation of judicial activism, has introduced a new dimension regarding judiciary’s involvement in public administration16. The sanctity of locus standi and the procedural complexities are totally side-tracked in the causes brought before the courts through SAL. In the beginning, the application of SAL was confined only to improving the lot of the disadvantaged sections of the society who by reason of their poverty and ignorance were not in a position to seek justice from the courts and, therefore, any member of the public was permitted to maintain an application for appropriate directions17.

 

The new role of the Supreme Court has been criticised in some quarters as being violative of the doctrine of separation of powers; it is claimed that the Apex Court has, by formulating policy and issuing directions in respect of various aspects of the country’s administration, transgressed into the domain of the executive and the legislature. As Justice Cardozo puts it, “A Constitution states or ought to state not rules for the passing hour but principles for an expanding future.”18 It is with this view that innovations in the rules of standing have come into existence.

 

Limitation on the power of review:

 

The expansion of the horizon of judicial review is seen both with reverence and suspicion; reverence in as much as the judicial review is a creative element of interpretation, which serves as an omnipresent and potentially omnipotent check on the legislative and executive branches of government. But at the same time there is a danger that they may trespass into the powers given to the legislature and the executive.

 

One many say that if there is any limitation on judicial review other than constitutional and procedural19 that is a product of judicial self-restraint. As justice Dwivedi empathically observed, “Structural socio-political value choices involve a complex and complicated political process. This court is hardly fitted for performing that function. In the absence of any explicit Constitutional norms and for want of complete evidence, the court’s structural value choices will be largely subjective. Our personal predilections will unavoidably enter into the scale and give colour to our judgment. Subjectivism is calculated to undermine legal certainty, an essential element of rule of law.”20

 

The above observations also reveal another assumption to support an attitude of self-restraint, viz., the element subjectiveness in judicial decision on issues having socio-political significance. When one looks at the decisions of the Supreme Court on certain questions of fundamental issues of constitutional law one can see that there is a sharp division among the judges of the apex court on such basic questions of power of the Parliament to amend the Constitution, federal relations, powers of the President etc. This aptly demonstrates the observation of the judge. This would mean that though there has been expansion of powers of judicial review one cannot also say that this cannot be overturned.

 

Judicial self-restrain in relation to legislative power manifests itself in the form the there is a presumption of constitutionality when the validity of the statute is challenged. In the words of Fazl Ali, “…the presumption is always in favour of the constitutionality of an enactment, and the burden is upon him who attacks it to show that there has been a clear transgression of the constitutional principles”21

 

In applying the presumption of constitutionality the Courts sometimes apply an interpretational device called ‘reading down’. The essence of the device is that “if certain provisions of law construed in one way would make them consistent with the constitution, and another interpretation would render them unconstitutional, the court would lean in favour of the former construction.”22 But all this depends on the outlook and values of the judge.23

 

When it come judicial review of administrative action though the presumption of validity is not so strong in the case of administrative action as in the case of statutes. Still, when the legislature expressly leaves a matter to the discretion of an administrative authority the courts have adopted an attitude of restraint. They have said we cannot the question the legality of the exercise of discretionary power unless and until it is an abuse of discretionary power (which includes mala fide exercise of power, exercising the power for an improper motive, decision based on irrelevant considerations or in disregard of relevant consideration, and in some cases unreasonable exercise of power) and non-exercise of discretion ( which come when power is exercised without proper delegation and when it is acted under dictation).

 

The relevant considerations which should make the judicial choice in favour of activism or restraint are the policy and scheme of the statute, the object of conferring discretionary powers, the nature and scope of the discretion, and finally, the nature of the right and interests affected by the decision. Any impulsive move to activism without a serious consideration of these factors may only be viewed as undesirable. Judicial activism, being an exception, not the general rule, in relation to the control of discretionary power, needs strong reasons to justify it. In the absence of such strong support of reasons the interventionist strategy may provoke the other branches of Government may retaliate and impose further limitations on the scope of judicial review.

 

Conclusion:

 

Accountability is an essential part of the rule of law. It is essential for another reason, as in the earlier editions of Dicey,24 of course modified in later editions, referring to John Wilkes’s case,25 that “conferment of any discretion tends to arbitrariness and therefore there is something inconsistent with the rule of law.” But then, as time passed, it was realized that conferment of some discretion for the purpose of application to the facts of a given case is something you cannot do away with. The area of discretion should be the minimum possible, and set norms, standards or guidelines should regulate it, so that it does not tend to become arbitrary. Therefore, the rule of non-arbitrariness is something to be tested by the judiciary whenever the occasion arises.26

 

The growth of judicial review is the inevitable response of the judiciary to ensure proper check on the exercise of public power. Growing awareness of the rights in the people; the trend of judicial scrutiny of every significant governmental action and the readiness even of the executive to seek judicial determination of debatable or controversial issues, at times, may be, to avoid its accountability for the decision, have all resulted in the increasing significance of the role of the judiciary. There is a general perception that the judiciary in this country has been active in expansion of the field of judicial review into non-traditional areas, which earlier were considered beyond judicial purview.

 

The Judges have a duty to perform, which is even more onerous to keep the judicial ship afloat on even keel. It must avoid making any ad hoc decision without the foundation of a juristic principle, particularly, when the decision appears to break new grounds. The judgments must be logical, precise, clear, and sober, rendered with restraint in speech avoiding saying more than that, which is necessary in the case.27

 

It must always be remembered that a step taken in a new direction is fraught with the danger of being a likely step in a wrong direction. In order to be a path-breaking trend it must be a sure step in the right direction. Any step satisfying these requirements and setting a new trend to achieve justice can alone be a New Dimension of Justice and a true contribution to the growth and development of law meant to achieve the ideal of justice.

Landforms

Three Geological divisions:

  1. The peninsular block
  2. The Himalayas and other Peninsular Mountains
  3. Indo-Ganga-Brahmaputra Plain

 

  • Peninsualar block is made of gneisses (metamorphic) and granites (igneous).

Six physiographic divisions:

  1. The Northern and North-eastern Mountains
  2. The Northern Plain
  3. The Peninsular Plateau
  4. The Indian Desert
  5. The Coastal Plains
  6. The Islands

Northern and North-Eastern Mountains

Approximate length of the Great Himalayan range: 2500 KM. Width: 160-400 KM

Impact of Himalayas on the climate of India?

It can be divided into five sub-divisions:

  1. Kashmir (or Northwestern) Himalayas
  2. Himachal and Uttaranchal Himalayas
  3. Darjeeling and Sikkim Himalayas
  4. Arunachal Himalayas
  5. Eastern Hills and Mountains

Kashmir Himalayas

  • Ranges: Karakoram, Ladhakh, Zaskar, Pir Pinjal
  • Glaciers: Baltoro, Siachen
  • Passes: Zoji La (Great Himalayas), Banihal (Pir Pinjal), Photu La (Zaskar) and Khardung La (Ladakh)
  • Lakes: (freshwater) Dal and Wular; (saltwater) Pangong Tso and Tso Moriri
  • Pilgrimage: Vaishno Devi, Amarnath Cave, Charar-e-Sharif
  • They are also famous for Karewa formations which are useful for the cultivation of Zafran (a local variety of Saffron). Karewas are the thick deposits of glacial clay and other materials embedded with moraines.
  • Kashmir is located on the banks of Jhelum river.
  • Meanders is a typical feature associated with the rivers in this region.
  • In South, there are longitudinal valleys called duns; Jammu dun and Pathankot dun

 

Himachal and Uttarakhand Himalayas

  • Lies between rivers Ravi and Kali
  • Drained by two major river systems: Indus and Ganga
  • Northernmost part is an extension of the Ladakh desert, lies in Spiti.
  • Ranges: Great Himalayan Range, Lesser Himalayas (Dhaoladhar in HP and Nagtibha in Uttarakhand), Shivalik range
  • Pilgrimage: Gangotri, Yamunotri, Kedarnath, Badrinath, Hemkund Sahib and the five famous prayags (Refer to Panch Prayag)
  • Famous for hill stations: Dharamshala, Mussoorie, Shimla, Kaosani; Cantt.: Kasauli, Almora, Lansdowne, Ranikhet
  • The important distinguishing features of this area are the ‘Shivalik’ and ‘Dun formations’.
  • Important duns: Chandigarh-Kalka, Nalagarh, Dehra, Harike, Kota
  • Dehradun is the largest of all duns: Length – 35-45 KM, Width: 22-25 KM
  • Inhabited with the Bhotia They migrate to higher reaches (Bugyals) in summer and return to the valleys during winters.

 

Darjeeling and Sikkim Himalayas

  • Between Nepal Himalayas and Bhutan Himalayas.
  • Fast flowing rivers such as Tista
  • Peaks: Kanchenjunga
  • Tribe: Lepcha
  • Has a mixed population of Nepalis, Bengalis and tribals from Central India.
  • Importance: Due to the moderate slope, it is best suited for tea plantations. <India produces about 26 pc of tea in the world; second after China. Also, accounts for 12 pc of tea exports; fourth in the world.>
  • Duar formations are peculiar to this region.

 

Arunachal Himalayas

  • From Bhutan Himalayas to Diphu pass in the east.
  • Direction: Southwest to Northeast
  • Peaks: Kangtu and Namya Barwa
  • Rivers: Brahmaputra, Kameng, Subansiri, Dihang, Dibang and Lohit.
  • These rivers are perennial and have the highest hydro-electric power potential in the country.
  • Tribes: Monpa, Daffla, Abor, Mishmi, Nishi and Nagas
  • These communities practice shifting cultivation known as Jhumming.

 

Eastern Hills and Mountains

  • Direction: North to South
  • Ranges: Patkai Bum, Naga hills, Manipur hills, Mizo or Lushai hills
  • These are low hills
  • Tribes practice Jhum cultivation
  • Rivers: Barak. Most of the Nagaland rivers form a tributary of Brahmaputra. Rivers in eastern Manipur are the tributaries of Chindwin, which in turn is a tributary of the Irrawady of Myanmar.
  • Lake: Loktak
  • Loktak Lake: is an important lake in Manipur which is surrounded by mountains on all sides. It is the largest freshwater lake in northeastern India. Also called the only Floating Lake in the world due to floating masses of organic matter on it. It serves as a source for hydropower generation, irrigation and drinking water supply.
  • Keibul Kamjao National Park located in the Bishnupur district of Manipur is the only floating park in the world and is an integral part of the Loktak Lake. Home to the endangered Manipur Eld’s Deer or Brow-antlered Deer or Sangai or Dancing Deer.
  • Mizoram is also known as the ‘Molassis basin’ which is made up of soft unconsolidated deposits.

The Northern Plains

  • Formed by the alluvial deposits of rivers – Indus, Ganga and Brahmaputra.
  • Length: 3200 KM; Width: 150-300 KM

Three main zones:

  1. Bhabar
  2. Tarai
  3. Alluvial Plains (Khadar and Bangar)

Bhabar

  • Narrow belt. 8-10 KM wide.
  • Paralllel to Shivalik at the break-up of the slope. Hence, streams and rivers deposit heavy rocks (and at times disappear) in this zone.

Tarai

  • South of Bhabar. 10-20 KM wide.
  • Rivers re-emerge and create marshy and swampy conditions known as Tarai.

Alluvial Belt

  • South of Tarai.
  • Features of mature stage of fluvial erosional and depositional landforms such as sand bars, meanders, ox-bow lakes and braided channels. Riverine islands in Brahmaputra.
  • Brahmaputra takes a turn an almost 90 degree turn at Dhubri (Assam) before entering Bangladesh.

 

Peninsular Plateau

  • Bounded by the Delhi ridge, Rajmahal Hills, Gir range and Cardamom hills.
  • Made up of a series of patland plateaus: Hazaribagh, Palamu, Ranchi, Malwa, Coimbatore, Karnataka etc.
  • One of the oldest and most stable landmass of India.
  • Physiographic Features: Tors, block mountains, rift valleys, spurs, bare rocky structures, hummocky hills and quartzite dykes offering natural sites for water storage.
  • Black soil in western and northwestern parts.
  • Bhima fault in this region has frequent seismic activity (Lathur earthquake)
  • NW part also has ravines and gorges: Chambal, Bhind and Morena.

Three broad regions:

  1. Deccan Plateau
  2. Central Highlands
  3. Northwestern Plateau

Deccan Plateau

  • Bordered by Eastern Ghats, Satpura, Maikal range and Mahadeo hills
  • Important ranges: WG: Sahyadri, Nilgiri, Anaimalai and Caradamom hills; EG: Javadi hills, Palconda range, Nallamala Hills, Mahendragiri hills
  • EG and WG meet at Nilgiri hills.
  • Highest peak: Anaimudi (2695 m) on Anaimalai hills; Dodabetta (2637 m) on Nilgiri hills.
  • Rivers: Mahanadi, Godavari, Krishna, Kaveri etc.

Central Highlands

  • Bounded by the Aravali and Satpura range.
  • Relic mountains, highly denuded and form discontinuous ranges.
  • Near Jaisalmer it is covered by the longitudinal sand ridges and crescent-shaped sand dunes called barchans.
  • Elevation: 700-1000 m
  • Banas, a tributary of Chambal, originates in the Aravalli. Other tributaries of Yamuna originate from the Vindhyan and Kaimur ranges.
  • Minerals in Chotanagpur plateau.

 

Northeastern Plateau

  • Extension of the main Peninsular plateau.
  • Meghalaya and Karbi Anglong plateau.
  • Megahalaya plateau: Garo hills, Khasi hills and Jaintia hills (named after the tribals inhabiting the region)
  • Rich in minerals like coal, iron, sillimanite, limestone and uranium.
  • Receives maximum rainfall from SW monsoon. Hence, Meghalaya plateau has a highly eroded surface. Cherrapuni and Myswarnam.

 

Indian Desert

  • Aka Marusthali
  • Northwest of the Aravali hills
  • Dotted with longitudinal dunes and barchans.
  • Low rainfall: >150 mm per year Low vegetation cover
  • Evidence that this area was under the sea during the Mesozoic era.
  • Features: mushroom rocks, shifting dunes and oasis.
  • Rivers are ephemeral: Luni. Brackish lakes. Inland drainage.

 

Coastal Plains

Two divisions:

  1. Western coastal plains
  2. Eastern Coastal Plains

Western Coastal Plains

  • Submerged coastal plain. Hence, a narrow belt. Narrow in middle and broader towards north and south.
  • Ports: Provides natural conditions for the development of ports and harbours due to submergence. Kandla, Mazagaon (Mumbai), JLN port Navha Sheva, Maramagao, Mangalore, Cochin etc.
  • Mumbai has the world’s largest natural harbour.
  • May be divided into: Kachchh and Kathiawar coast in Gujarat, Konkan coast, Goan coast and Malabar coast.
  • Rivers don’t form delta.
  • Kayals (Backwaters): Found in the Malabar coast. Used for fishing and inland navigation. Every year Nehru Trophy Vallamkali (boat race) is held in Punnamada Kayal in Kerala.

 

Eastern Coastal Plains

  • Broader
  • Emergent coast. Hence, less number of ports and harbours. Chennai, Vizag, Paradwip, Haldia.
  • Delta formation

The Islands

Two major Divisions:

  1. Andaman and Nicobar
  2. Lakshwadeep & Minicoy

 

Andaman and Nicobar

  • Two major island groups: Ritchie’s archipelago and the Labrynth island.
  • The group is divided into: Andaman in the North and Nicobar in the South.
  • Andaman and Nicobar separated by the Ten Degree channel.
  • Barren Island
  • Peaks: Saddle Peak (N.Andaman – 738 m), Mt. Diavolo (Middle Andaman – 515 m), Mt. Koyob (S Andaman – 460 m) and Mt. Thuiller (Great Nicobar – 642 m)
  • Coral deposits found
  • Convectional rainfalls and equatorial type of vegetation.

Lakshadweep and Minicoy

  • Entire group built of coral deposits.
  • Total of 36 islands of which 11 are inhabited.
  • Smallest UT
  • Minicoy is the largest island
  • Separated by the 9 Degree Channel, north of which is the Amini Island and to the south Canannore island.
  • These islands have storm beaches consisting of unconsolidated pebbles, shingles, cobbles and boulders.

 

 

Types of soil

1. Alluvial Soils 22 Most fertile, Sandy loam in texture,
Rich in Potash, Phosphoric Acid, Lime & Organic matter
Deficient in Nitrogen & Humus
2. Regur/Black Soils 30 Also classified as Chernozem. Clay content 50%
Rich in iron, lime & Aluminium
Poor in Nitrogen, Phosphorus & organic content
3. Red & Yellow Soils 28 Known as omnibus group.
Rich in oxides of iron
Poor in Nitrogen, Phosphorus & Humus
4. Laterite Soils 2.62 Not very fertile. Typical of tropical region with heavy rainfall
Rich in iron oxide & potash
Poor in nitrogen, phosphate & calcium
5. Arid Soils 6.13 Rich in phosphate
Poor in Nitrogen & humus
6. Saline Soils 1.29 Known as Usara, Reh or Kallar
Contain a large proportion of Sodium, Potassium & Magnesium
Poor in Nitrogen & Calcium
7. Peaty & Organic 2.17 Normally heavy & black in colour. Highly acidic.
Rich in organic matter
Poor in phosphate & potash
8. Forest Soils 7.94 Acidic with low humus content
Poor in potash, phosphorus & lime
Sobriquets
1. Bolton of the east Ahmedabad
2. Manchester of South India Coimbatore
3. Granary of South India Thanjavur

 

 

 

 

 

National Parks of India
1. Wandur National Park Andaman & Nicobar
2. Kaziranga National Park Assam
3. Manas National Park Assam
4. Palamau National Park Jharkhand
5. Hazaribagh National Park Jharkhand (Rhinoceros)
6. Dachigam National Park J & K – Kashmir Stag (Hangul)
7. Hemis National Park J & K
8. Kishtwar National Park J & K
9. Silent Valley National Park Kerala
10. Eravikulam National Park Kerala
11. Bandhavgarh National Park M.P.
12. Kanha National Park M.P.
13. Madhav National Park M.P.
14. Pench National Park M.P.
15. Shivpuri National Park M.P. – Birds
16. Indravati National Park Chhattisgarh
17. Keoladeo National Park Rajasthan
18. Ranthambore National Park Rajasthan
19. Desert National Park Rajasthan
20. Sariska National Park Rajasthan
21. Namdapha National Park Arunachal Pradesh
22. Marine National Park Gujarat
23. Pin Valley National Park Himachal Pradesh

 

 

 

 

 

 

 

24. Bandipur National Park Karnataka
25. Nagarhole National Park Karnataka
26. Bannerghatta National Park Karnataka
27. Tadoba National Park Maharashtra
28. Boriveli National Park Maharashtra (or Sanjay Gandhi National Park)
29. Balpakram National Park Meghalaya
30. Nokrek National Park Meghalaya
31. Nandan Kanan National Park Orissa
32. Chandka Elephant Reserve Orissa
33. Simlipal Tiger Reserve Orissa
34. Corbett National Park Uttaranchal
35. Rajaji National Park Uttaranchal
36. Valley of Flower N. Park Uttaranchal
37. Nandadevi National Park Uttaranchal
38. Dudhwa National Park U.P.
39. Govind National Park U.P.

 

Wildlife Sanctuaries of India

1. Pakhal Wildlife Sanctuary Andhra Pradesh
2. Parambikulam Wildlife Sanctuary Tamil Nadu
3. Srisailam Wildlife Sanctuary Andhra Pradesh
4. Garampani Wildlife Sanctuary Assam
5. Kaimur wildlife Sanctuary Bihar (largest)
6. Dandeli Wildlife Sanctuary Karnataka
7. Periyar Wildlife sanctuary Kerala
8. National Chambal Wildlife Sanctuary M.P., U.P & Rajasthan
9. Great Indian Bustard Sanctuary Maharashtra (Ahmednagar)
10. Gomardha Wildlife Sanctuary Chhattisgarh
11. Harike Headworks Punjab
12. Jaldapara Wildlife sanctuary West Bengal
13. Sultanpur Bird Sanctuary Haryana
14. Raganathittu Wildlife Sanctuary Karnataka
15. Madumalai Sanctuary Tamil Nadu
16. Pulicat Sanctuary Andhra Pradesh
17. Chandraprabha Wildlife Sanctuary U.P (Varanasi)
18. Ranganthitoo Bird Sanctury Karnataka
19. Vedanthangal Bird Sanctuary Tamil Nadu

 

 

Breeds of Cattle
1. Cow Gir, Sahiwal, Red Sindhi, Deoni (Andhra Pr.), Nagori, Rathi, Siri, Malvi,
Tharparkar. Exotic breeds – Holstein, Friesian, Jersey, Brown Swiss.
2. Buffalo Murrah, Bhadawari, Nagpuri, Mehsana, Jaffrabadi, Surti, Nali-Ravi.
3. Sheep Jaisalmeri, Pugal, Bikaneri, Marwari, Kathiawari.
4. Goats Jamnapuri, Barbari

 

High Yielding Varieties of Seed

 

 

 

 

 

 

 

1. Wheat Kalyan Sona, Sonalika, Arjun, Lerma, Sharbati Sonora, WL series.
2. Rice Padma, Jaya, IR-8, Hamsa, Krishna, Cauvery, Annapurna
3. Maize Ganga-101, Deccan Hybrid
4. Jowar CSV-1 to CSV-7
5. Ragi Sharda
6. Cotton V-797, Hybrid 4,5, Digvijay, Varalaxmi, Sanjay, Deviraj, Virnar.

 

Roads, Railways & Waterways in India

1. National Highways 67700 Km Broad Guage 46800 km
2. State Highways 137000 Km Meter Guage 13000 km
3. District Roads 12 Lakh Km Narrow Guage 3100 km
4. Village Roads 15 Lakh Km Total Railway guage 63200 km
5. Border Roads 30,000 Km No of Trains 13500
6. Total Roads 33 Lakh Km No of Stations 7100
7. Total Waterways 14500 Km Electrified route 28%

 

National Waterways

1. National Waterways-1 Allahabad-Haldia stretch of the Ganga-Bhagirathi-Hoogly system
2. National Waterways-2 Sadiya-Dhubri stretch of the Brahmaputra system
3. National Waterways-3 The west coast canal from Kottapuram to Kollam along with the
Udyogmandal & Champakar canals (All in Kerala).

 

Indian Railways, Headquarters
1. Nothern Raiway Delhi
2. Southern Railway Chennai
3. Eastern Raiway Kolkata
4. Western Railway Mumbai (Churchgate)
5. North-Western Railway Jaipur
6. North-Central Railway Allahabad
7. North-Eastern Railway Gorakhpur
8. North-East Frontier Railway Guwahati
9. East Coast Railway Bhubaneshwar
10. East Central Railway Hazipur
11. West Central Railway Jabalpur
12. Central Railway Mumbai (V.T)
13. South-Central Railway Secundarabad
14. South Eastern Railway Kolkata
15. South-Western Railway Bangalore
16. South-East Central Railway Bilaspur
India Pipelines
1. Naharkatiya Oilfield in Assam to Barauni refinery in Bihar via Noonmati – First pipeline
2. Barauni-Kanpur pipeline for transport of refined petroleum
3. Haldia-Maurgram-Rajbandh pipeline
4. Ankleshwar oilfield to Koyali refinery in Gujarat
5. Mumbai High Koyali pipeline
6. Hajira-Bijapur-Jagdishpur (HBJ) pipeline (1750 km). Extended from Bijapur to Dadri in U.P.

 

 

 

 

 

7. Kandla to Luni in U.P via Delhi for LPG transport (1250 Km)
Airways-Internatioanal Airports
1. Mumbai Chhatrapati Shivaji International Airport (Sahar)
2. Delhi Indira Gandhi International Airport
3. Chennai Anna International Airport (Meenambakam)
4. Kolkata Subhash Chandra Bose International Airport
5. Ahmedabad Sardar Vallabh Bhai Patel International Airport
6. Amritsar Raja Sansi Airport
7. Bangalore Needumbassery International Airport
8. Goa Dabolim International Airport
9. Guwahati Lokapriya Gopinat Bardoli International Airport
10. Hyderabad Rajiv Gandhi International Airport
11. Thiruvananthapuram Trivandrum International Airport
12. Kochi Nedumbassery International Airport.
India’s Foreign Trade
1. Petroleum, Oil, Lubricants (POL) 27 % 1. Gems & Jewellery 17 %
2. Pearls & Precious stones 9 % 2. Readymade Garments 13 %
3. Gold & Silver 8.5 % 3. Chemicals 11 %
4. Capital goods 12 % 4. Cotton Textile 8 %
5. Electronic goods 9 % 5. Machine & Transport 6 %
6. Chemicals 7 % 6. Agricultural Exports 13.5 %
7. Edible Oils 3 % 7.
8. Coke, Coal & briquettes 2 % 8.

Fish & Fish products lead agricultural exports accounting for 3.1 % of the total value.

India’s major trading partners

1. USA 11.6 %
2. UAE 5.0 %
3. China 5 .0%
4. UK 4.4 %
5. Belgium 4.1 %
6. Germany 3.9 %
7. Japan 3.1 %
8. Switzerland 2.7 %
9. Hongkong 3.4 %
10. Singapore 3.0 %

 

 

Cities located on Rivers

City River State
Agra Yamuna UP
Badrinath Alaknanda Uttranchal
Cuttack Mahanadi Orissa
Dibrugarh Brahmaputra Assam
Ferozpur Sutlej Punjab

 

 

 

 

 

 

 

Guwahati Brahmaputra Assam
Hyderabad Musi AP
Jabalpur Narmada MP
Kanpur Ganga UP
Kota Chambal Rajasthan
Lucknow Gomti UP
Ludhiana Sutlej Punjab
Nasik Godavari Maharashtra
Pandharpur Bhima Maharashtra
Patna Ganga Bihar
Sambalpur Mahanadi Orissa
Srinagar Jhelum J&K
Surat Tapti Gujarat
Tiruchirapalli Cauvery Tamil Nadu
Varanasi Ganga UP
Vijaywada Krishna AP

 

Industries of India
1. Iron & Steel IISCO has 3 plants at Kulti, Hirapur & Burnpur. Visvesvaraya Iron & Steel
Co is located on the bank of Bhadravati river in Karnataka.
Hindustan Steel Limited (HSL) at Bhilai, Durgapur & Bokaro.
2. Cotton Textile 4% of GDP. 3.5 Crore population employed.
3. Sugar Industry
4. Aluminum HINDALCO (Renukoot), INDAL (Alupuram, Hirakud, Belgaum), Madras
Industry Aluminium Company (MALCO, Mettur), BALCO (Korba), NALCO
(Koraput)
5. Copper Smelting HCL is the main player & operates Khetri copper complex, Indian copper
complex (Ghatsila, Jharkhand), Malanjkhand copper project (Balghat,
M.P.), Taloja copper project (Raigad, Maharashtra).
6. Jute Textile Centers are Titagarh, budge-budge, Haora, Rishra, Serampore,
Bhadreshware, Shyamnagar.
7. Silk Textile Its varieties are Mulberry (88%), Eri (9%), Tassar (2%), Muga (1%)
8. Woolen Textile Punjab, Maharashtra & U.P account for 75% production. Dhariwal is most
important centre. Others are Amritsar, Ludhiana, Kharar.
9. Heavy Industry Heavy Engineering Corp Ltd (Ranchi), Tungabhadra Steel Products Ltd
(Karnataka), Bharat heavy plates & Vessels (Vishakhapatnam)
Mining & allied machinery corporation (Durgapur).
10. Machine Tools HMT (Bangalore, Pinjore in Haryana, Kalamassery in Kerala, Hyderabad,
Ajmer & Sri Nagar), Heavy Machine Tools (Ranchi), Machine Tools Corp
of India (Ajmer), National Instruments Factory at Kolkata.
11. Automobiles TELCO in Mumbai, Ashok Leyland in Chennai, Bajaj Tempo (Pune).
Defense vehicles are produced at Jabalpur.
12. Pesticides Hindustan Insecticides Ltd (Delhi, Kerala & Rasayani, Maharashtra)
Hindustan Organic Chemicals Ltd (Rasayani, Raigad & Kochi)
13. Cement Industry Top manufacturing states are M.P, Chhattisgarh, Andhra Pr & Raj. Jamul
is largest plant of M.P. & Sawai Madhopur leads in Rajasthan
14. Leather Industry India is 3rd largest player after Italy & U.S.

 

 

 

 

 

 

 

15. Glass Industry Bahjoi & Naini (Both in U.P.) are famous for glass sheets & Firozabad for
bangles.
16. Paper Industry Rajmundhry (Andhra Pr), Ballarpur (Maharshtra), Titagarh (Bengal)
Bhadravati, Dandeli (Karnataka), Hoshangabad (M.P)
17. Liquor Industry U.P. has more than 50% installed capacity. Maharashtra, A.P are others.
18. Aircraft industry Important centres are HAL-Bangalore, Lucknow, Hyderabad, Others are
Koraput (Orissa) & Nasik.
19. Railway Chittaranjan Locomotive works (Electric engines) – West Bengal
Equipments Diesel Locomotive works – Varanasi
Integral Coach Factory – Perambur, Tamil Nadu
Rail Coach Factory – Kapurthala, Punjab.
Diesel Componets Works – Patiala
Railway wheels & Axels – Yalahanka (Banalore) & Durgapur.
20. Ship Building Hindustan Shipyard (Vishakhapatnam), Garden-Reach Shipbuilders
(Kolkata), Mazagaon Dock (Mumbai), Goa Shipyard (Vasco).
21. Pharmaceuticals IDPL – Rhishikesh, Hyderabad, Gurgaon, Chennai, Muzzafarpur
Hindustan Antibiotics Ltd – Pimpri, Pune – first public sector undertaking
in this industry
22. Zinc & Lead Hindustan Zinc Ltd at Debari, Rajasthan (both zinc & lead)
23. Fertilizers FCI-Sindri
Industry National Fertilizers Limited – Nangal
Hindustan Fertilizer Corp Ltd- Namrup (Assam), Durgapur.
Rashtriya Chemicals & Fertilizers Ltd – Trombay, Thal
Gujarat, Tamil Nadu, U.P & Maharashtra are the 4 largest in order.
24. Heavy Electricals BHEL (Bhopal, Tiruchirapalli, Ramchandrapuram in A.P, Jammu,
Bangalore, Hardwar). Ms ABL at Durgapur.
Hindustan Cables Factory (Rupnarainpur, Bengal), Indian Telephone
industries (Bangalore), Bharat Electronics (Bangalore),
Electronics corporation of India (Hyderabad)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Industrial Regions of India
4. Mumbai-Pune rgion Tata hydel stations at Khopali, Bhivpuri, Bhira & koyna
Solapur, Satara, Sangli & Ahmednagar
5. Hugli Industrial Belt From Naihati to Budge-Budge along left bank & Tribeni to
Nalpur along right bank. Other centres are Serampur, Rishra,
Shibpur, Kakinara, Shamnagar, Titagarh, Sodepur, Bansbaria,
Belgurriah, Triveni, Belur.

 

 

 

 

6. Bangalore-Tamil Nadu Pykara project supplies electricity. Salem, Madurai,
Tiruchirapalli, Mettur, Mysore, Mandya.
7. Ahmedabad-Vadodara Dhuvaran Thermal power station, Uttaran gas power station,
Ukai hydro project. Koyali, Anand, Khera, Surendranagar,
Rajkot, Surat, Valsad, Jamnagar
8. Chhotanagpur Region Chaibasa, Dhanbad, Sindri, Hazaribagh, Asansol, Durgapur,
Dalmianagar, Ranchi, Daltonganj.
9. Gurgaon Delhi Meerut Faridabad, Modinagar, Ambala, Agra, Mathura
Six Largest National Highways
National Highway Route Lengh Km
NH 7 Varanasi-Kanyakumari 2369
NH 6 Kolkata & Dhule via Raipur, Nagpur. 1932
NH 5 Baharagora-Chennai 1533
NH 2 Delhi-Kolkata 1490
NH 8 Delhi-Mumbai 1428
NH 17 Panvel-Edapally (Karnataka) 1270
Important National Highways
NH-1 Delhi to Amritsar via Ambala & Jallandhar 456
NH-1A Jallandhar & Uri via Jammu, Srinagar & Baramula
NH 22 Ambala to Shipkila on Indo china border 460
NH 28 A Pipra to Nepal border 68
NH 35 Barasat-Bongaigaon-Indo Bangladesh border 61
NH 39 Numaligarh-Indo Burma border. 436
NH 3 Agra to Mumbai via Gwalior
NH 4 Chennai with Thane
Important Industrial Centers of India
1. Ferozabad Glass Bangles
2. Mirzapur Pottery
3. Jaipur Gems Industry
4. Trivandrum Wood Carving
5. Kadi Mineral Oil
6. Korba Aluminium
7. Bhatinda Fertilizers

 

 

 

 

 

 

Racial Profile of India
1. Negritos Only on Andamans & Nicobar
2. Proto-Australoid Includes Tribal group of central & southern India. Veddahs,
Maleveddahs, Irulas, Sholgas considere true representative.
3. Mongoloids Garo, Khasi, Jaintia, Lipchas, Chakmas, Murmis, Naga & Dafla
4. Mediterranean Divided into: Palaeo-Mediterranean (or Dravidians) inhabiting

 

 

 

 

southern parts of India & True Mediterranean inhabiting northern &
western part of the country.
5. Brachycephals Characterized by broad heads. Coorgis & Parsis are representative.
They are divided into Alpinoids, Dinarics & Armenoids
6. Nordics/Indo-Aryans Inhabit parts of north India. They are mostly represented among the
upper castes in northern India esp in Punjab

 

Demographic Profile of India

 

S. Parameter Top in Parameter Bottom in Parameter
1. Population U.P, Maharasthra, Bihar, W. Sikkim, Mizoram, Arunachal
(1027 million) Bengal & Andhra Pr. Pradesh & Goa
Delhi (UTs) Lakshadweep (UT)
2. Population Density West Bengal (904), Bihar (880), Arunachal Pr (13), Mizoram,
(324 per/Sq km) Kerala, U.P, Punjab. Sikkim
Delhi Andaman & Nicobar.
3. Popln Growth Nagaland (64%), Sikkim Kerala (9.4%)
4. Growth Urban population Arunachal Pradesh Kerala
Dadra & Nagar haveli
5. Growth rural population Nagaland Tamil Nadu
6. Proportion of Urban Populn Goa (50%) Arunachal Pradesh (5%)
Dadra & Nagar Haveli
7. Average size of Villages Kerala (~15000 people) Arunachal (~200)
8. Sex Ratio (933) Kerala (1058) Haryana (861), Punjab &
Pondicherry Sikkim
Daman & Diu
9. Death Rate Orissa Kerala (6 per thousand)
10. Infant Mortality Rate Orissa Kerala
11. Literacy Kerala (91%), Mizoram, Goa, Bihar (47%), Jharkhand,
Maharashtra, Himachal Pradesh J&K, Arunachal Pr, U.P.
Lakshadweep (UT) Dadra & Nagar Haveli (UT)

 

 

 

 

 

 

MARKETING MIX  

 

Marketing involves a number of activities. To begin with, an organisation may decide on its target group of customers to be served. Once the target group is decided, the product is to be placed in the market by providing the appropriate product, price, distribution and promotional efforts. These are to be combined or mixed in an appropriate proportion so as to achieve the marketing goal. Such mix of product, price, distribution and promotional efforts is known as ‘Marketing Mix’.

 

 

 

So, Marketing Mix consists of 4Ps They are :-

 

  • Products,
  • Price,
  • Place (distribution) and

 

These 4 ‘P’s are called as elements of marketing and together they constitute the marketing mix. All these are inter-related because a decision in one area affects decisions in other areas.

 

PRODUCT:

 

Product refers to the goods and services offered by the organisation. A pair of shoes, a plate of dahi-vada, a lipstick, all are products. All these are purchased because they satisfy one or more of our needs.  The term product is defined as “anything that can be offered to a market to satisfy a want”. It normally includes physical objects and services. So, in simple words, product can be described as a bundle of benefits which a marketer offers to the consumer for a price.

 

Product can be broadly classified on the basis of

 

 (1) USE,    (2) DURABILITY,   and    (3)TANGIBLITY

 

  • Based onUSE, the product can be classified as:

 

   (a) Consumer Goods and

(b) Industrial Goods.

 

  • Consumer goods: Goods meant for personal consumption by the households or ultimate consumers are called consumer goods. This includes items like toiletries, groceries, clothes etc. Based on consumers’ buying behaviour the consumer goods can be further classified as :

 

(i) Convenience Goods;   (ii) Shopping Goods; and  (iii) Speciality Goods.

 

  • Convenience Goods :

 

The convenience goods are bought frequently without much planning or shopping effort and are also consumed quickly. Buying decision in case of these goods does not involve much pre-planning. Such goods are usually sold at convenient retail outlets.

 

  • Shopping Goods:

 

These are goods which are purchased less frequently and are used very slowly like clothes, shoes, household appliances. In case of these goods, consumers make choice of a product considering its suitability, price, style, quality and products of competitors and substitutes, if any. In other words, the consumers usually spend a considerable amount of time and effort to finalise their purchase decision as they lack complete information prior to their shopping trip. shopping goods involve much more expenses than convenience goods.

 

  • Speciality Goods :

 

As  some special characteristics of certain categories of goods, people generally put special efforts to buy them. They are ready to buy these goods at prices at which they are offered and also put in extra time to locate the seller to make the purchase. Examples of speciality goods are cameras, TV sets, new automobiles etc.

 

(b) Industrial Goods:  Goods meant for consumption or use as inputs in production    of other products or provision of some service is termed as ‘industrial goods’. These are meant for non-personal and commercial use and include (i) raw materials, (ii) machinery, (iii) components, and (iv) operating supplies (such as lubricants, stationery etc). The buyers of industrial goods are supposed to be knowledgeable, cost conscious and rational in their purchase and therefore, the marketers follow different pricing, distribution and promotional strategies for their sale.

 

  • Based on DURABILITY , the products can be classified as :

 

(a) Durable Goods and

 (b) Non-durable Goods

 

  • Durable Goods : Durable goods are products which are used for a long period i.e., for months or years together. Examples of such goods are refrigerator, car, washing machine etc. In case of these goods, seller’s reputation and presale and after-sale service are important determinants of purchase decision.

 

  • Non-durable Goods: Non-durable goods are products that are normally consumed in one go or last for a few uses. Examples of such products are soap, salt, pickles, sauce etc. These items are consumed quickly and we purchase these goods more often. Such items are generally made available by the producer through large number of convenient retail outlets. Profit margins on such items are usually kept low.

 

 

  • Based on TANGIBLITY , the products can be classified as:

 

(a) Tangible Goods and

(b) Intangible Goods.

 

  • Tangible Goods : Most goods, whether these are consumer goods or industrial goods and whether these are durable or non-durable, fall in this category as they have a physical form, that can be touched and seen. Thus, all items like groceries, cars, raw-materials, machinery etc. fall in the category of tangible goods.

 

  • Intangible Goods : Intangible goods refer to services provided to the individual consumers or to the organisational buyers (industrial, commercial, institutional, government etc.). Services are essentially intangible activities which provide want or need satisfaction. Medical treatment, postal, banking and insurance services etc., all fall in this category.

 

PRICING

 

 

It is the exchange value of goods and services in terms of money. Pricing (determination of price to be charged) is another important element of marketing mix and It plays a crucial role in the success of a product in the market.

 

It has to be fixed after taking various aspects into consideration. The factors usually taken into account while determining the price of a product can be broadly described as follows:

 

  • Cost: No business can survive unless it covers its cost of production and distribution. In large number of products, the retail prices are determined by adding a reasonable profit margin to the cost. Higher the cost, higher is likely to be the price, lower the cost lower the price.

 

  • Demand: Demand also affects the price in a big way. When there is limited supply of a product and the demand is high, people buy even if high prices are charged by the producer. The price is dependent upon prospective buyers’ capacity and willingness to pay and their preference for the product. In this context, price elasticity, i.e. responsiveness of demand to changes in price should also be kept in view.

 

 

  • Competition: The price charged by the competitor for similar product is an important determinant of price. A marketer would not like to charge a price higher than the competitor for fear of losing customers.

 

  • Marketing Objectives: A firm may have different marketing objectives such as maximisation of profit, maximisation of sales, bigger market share, survival in the market and so on. The prices have to be determined accordingly.

 

  • Government Regulation: Prices of some essential products are regulated by the government under the Essential Commodities Act. For example, prior to liberalisation of the economy, cement and steel prices were decided by the government. Hence, it is essential that the existing statutory limits, if any, are also kept in view while determining the prices of products by the producers.

 

METHODS OF PRICE FIXATION

Methods of fixing the price can be broadly divided into the following categories-

 

  1. Cost based pricing
  2. Competition based pricing
  3. Demand based pricing
  4. Objective based pricing

 

  1. Cost Based Pricing: Under this method, price of the product is fixed by adding the amount of desired profit margin to the cost of the product. While calculating the price in this way, all costs (variable as well as fixed) incurred in manufacturing the product are taken into consideration.

 

  1. Competition Based Pricing: In case of products where market is highly competitive and there is negligible difference in quality of competing brands, price is usually fixed closer to the price of the competing brands. It is called ‘young rate pricing’ and is a very convenient method because the marketers do not have to worry much about demand and cost and effect the change as per the changes by the industry leaders.

 

  1. Demand Based Pricing: At times, prices are determined by the demand for the product. Under this method, without paying much attention to cost and competitor’s prices, the marketers try to ascertain the demand for the product. If the demand is high they decide to take advantage and fix a high price. If the demand is low, they fix low prices for their product

 

  1. Objective Based Pricing: This method is applicable to introduction of new (innovative) products. If, at the introductory stage of the products, the organisation wishes to penetrate the market i.e., to capture large parts of the market and discourage the prospective competitors to enter into the fray, it fixes a low price. Alternatively, the organisation may decide to skim the market i.e., to earn high profit by taking advantage of a group of customers who give more importance to their status or distinction and are willing to pay even a higher price for it. In such a situation they fix quite high price at the introductory stage of their product and market it to only those customers who can afford it.

 

 

PLACE/DISTRIBUTION

 

A distribution channel consists of the set of people and firms involved in the transfer of title to a product as the product moves from producer to ultimate consumer or business user. Basically it refers to the vital links connecting the manufacturers and producers and the ultimate consumers/users. It includes both the producer and the end user and also the middlemen/agents engaged in the process of transfer of title of goods.

 

 

 

TYPES OF CHANNELS OF DISTRIBUTION

 

  • Zero stage channel of distribution

 

Manufacturer —-> Consumer

 

Zero stage distribution channel exists where there is direct sale of goods by the producer to the consumer. This direct contact with the consumer can be made through door-todoor salesmen, own retail outlets or even through direct mail.

 

  • One stage channel of distribution

 

Manufacturer—–>Retailer——–> Consumer

 

This type of distribution channel is preferred by manufacturers of consumer durables like refrigerator, air conditioner, washing machine, etc. where individual purchase involves large amount.

 

  • Two stage channel of distribution

 

Manufacturer—->Wholesaler—>Retailer—>Consumer

 

This is the most commonly used channel of distribution for the sale of consumer    goods. In this case, there are two middlemen used, namely, wholesaler and retailer. This is applicable to products where markets are spread over a large area, value of individual purchase is small and the frequency of purchase is high.

 

  • Three stage channel of distribution

 

Manufacturer—->Agents—-> Wholesaler—>Retailer—>Consumer

 

When the number of wholesalers used is large and they are scattered throughout the country, the manufacturers often use the services of mercantile agents who act as a link between the producer and the wholesaler. They are also known as distributor.

 

 

PROMOTION

 

Promotion refers to the process of informing and persuading the consumers to buy certain product. By using this process, the marketers convey persuasive message and information to its potential customers.

 

It is thus a persuasive communication and also serves as a reminder. A firm uses different tools for its promotional activities which are as follows:

 

– Advertising

– Publicity

– Personal selling

– Sales promotion

 

These are also termed as four elements of a promotion mix.

 

 

 

 

  • Advertising: Advertising is the most commonly used tool for informing the present and prospective consumers about the product, its quality, features, availability, etc. It is a paid form of non-personal communication through different media about a product, idea, a service or an organisation by an identified sponsor. It can be done through print media like newspaper, magazines, billboards, electronic media like radio, television etc. It is a very flexible and comparatively low cost tool of promotion.

 

  • Publicity: This is a non-paid process of generating wide range of communication to contribute a favourable attitude towards the product and the organisation. As the articles in newspapers about an organisation, its products and policies. The other tools of publicity are press conference, publication and news in the electronic media etc. It is published or broadcasted without charging any money from the firm. Marketers often spend a lot of time and effort in getting news items placed in the media for creation of a favourable image of the company and its products.

 

 

  • Personal selling: It is a direct presentation of the product to the consumers or prospective buyers. It refers to the use of salespersons to persuade the buyers to act favourably and buy the product. It is most effective promotional tool in case of industrial goods.

 

  • Sales promotion: This refers to short-term and temporary incentives to purchase or induce trials of new goods. The tool includes contests, games, gifts, trade shows, Discounts, etc. Sales promotional activities are often carried out at retail levels.

Utilization for industrial and other purposes, irrigation

 

 

Industrial Uses

The share of industrial sector is limited to 2 per cent of the surface water utilisation and 5 per cent of the ground-water. Rough estimates indicate that the present water use in the industrial sector is of the order of 15 km3 . The water use by thermal and nuclear power plants with installed capacities of 40,000 MW and 1500 MW respectively, is estimated to be about 19 km3 . The industries are needed to be switched over to water efficient technologies.

By 2050, India expects to be a major industrial power in the world. Industry needs water fresh or recycled. Processing industries depend on abundance of water. It is estimated that 64 cubic km of water will be needed by 2050 A.D. to sustain the industries. Thermal power generation needs water including a small part that is consumptive. Taking into account the electric power scenario in 2050 A.D., energy related requirement (evaporation and consumptive use) is estimated at 150 cubic km.

With the advent of globalization and privatization ,industrial activities water demands share of water is changing rapidly. In addition increase in population and rapid urbanisation also put an additional demand on water resources.

Water treatment plants for all industries emanating polluted water is the need of the hour.

Domestic Uses

The share of domestic sector is higher (9 per cent) in surface water utilisation as compared to groundwater.The National Water Policy has assigned the highest priority for drinking water supply needs followed by irrigation, hydro-power, navigation and industrial and other uses.

Million Development Goals target to halve the proportion of people without sustainable access to safe drinking water and basic sanitation by 2015. The indicators of progress towards this target are;

1) proportion of population with sustainable access to an improved drinking water source (urban and rural);

2) proportion of population with access to improved sanitation.

It is estimated that by 2050, water requirements per year for domestic use will be 90 km3 for low demand scenario and 111 km3 for high demand scenario. It is expected that about 70% of urban water requirement and 30% of rural water requirement will be met by surface water sources and the remaining from groundwater.

Irrigation is needed because of spatio-temporal variability in rainfall in the country. The large tracts of the country are deficient in rainfall and are drought prone. North-western India and Deccan plateau constitute such areas. Winter and summer seasons are more or less dry in most part of the country. Hence, it is difficult to practise agriculture without assured irrigation during dry seasons.

After independence, the Government of India gave high priority to the construction of major irrigation related infrastructure. At present, India has a capacity to store about 200 billion cubic meters of water, a gross irrigated area of about 90 million hectares 2 and an installed hydro-power capacity of about 30,000 megawatts (World Bank, 2005)

Expansion of Irrigation facilities, along with consolidation of the existing systems, has been the main part of the strategy for increasing production of food grains. With sustained and systematic development of irrigation, the irrigation potential through major, medium and minor irrigation projects has increased from 22.6 million hectares (mha.) in 1951, when the process of planning began in India, to about 98.84 mha. at the end of the year 2004-05.

Age: Sex, ratio, rural-urban composition

 

Rural-Urban Composition:

For the first time since Independence, the absolute increase in population is more in urban areas that in rural areas

Rural Population in India: 68.84%

Urban Population in India: 31.16%

Level of urbanization increased from 27.81% in 2001 Census to 31.16% in 2011 Census

The proportion of rural population declined from 72.19% to 68.84%

 

INDIA/STATE/UT TOTAL POPULATION RURAL POPULATION URBAN POPULATION RURAL POP PERCENTAGE URBAN POP PERCANTAGE
A & N ISLANDS 3,79,944 2,44,411 1,35,533 64.33 35.67
ANDHRA PRADESH 8,46,65,533 5,63,11,788 2,83,53,745 66.51 33.49
ARUNACHAL PRADESH 13,82,611 10,69,165 3,13,446 77.33 22.67
ASSAM 3,11,69,272 2,67,80,516 43,88,756 85.92 14.08
BIHAR 10,38,04,637 9,20,75,028 1,17,29,609 88.7 11.3
CHANDIGARH 10,54,686 29,004 10,25,682 2.75 97.25
CHHATTISGARH 2,55,40,196 1,96,03,658 59,36,538 76.76 23.24
DADRA & NAGAR HAVELI # 3,42,853 1,83,024 1,59,829 53.38 46.62
DAMAN & DIU 2,42,911 60,331 1,82,580 24.84 75.16
GOA 14,57,723 5,51,414 9,06,309 37.83 62.17
GUJARAT 6,03,83,628 3,46,70,817 2,57,12,811 57.42 42.58
HARYANA 2,53,53,081 1,65,31,493 88,21,588 65.21 34.79
HIMACHAL PRADESH 68,56,509 61,67,805 6,88,704 89.96 10.04
INDIA 1,21,01,93,422 83,30,87,662 37,71,05,760 68.84 31.16
JAMMU & KASHMIR 1,25,48,926 91,34,820 34,14,106 72.79 27.21
JHARKHAND 3,29,66,238 2,50,36,946 79,29,292 75.95 24.05
KARNATAKA 6,11,30,704 3,75,52,529 2,35,78,175 61.43 38.57
KERALA 3,33,87,677 1,74,55,506 1,59,32,171 52.28 47.72
LAKSHADWEEP 64,429 14,121 50,308 21.92 78.08
MADHYA PRADESH 7,25,97,565 5,25,37,899 2,00,59,666 72.37 27.63
MAHARASHTRA 11,23,72,972 6,15,45,441 5,08,27,531 54.77 45.23
MANIPUR 27,21,756 18,99,624 8,22,132 69.79 30.21
MEGHALAYA 29,64,007 23,68,971 5,95,036 79.92 20.08
MIZORAM 10,91,014 5,29,037 5,61,977 48.49 51.51
NAGALAND 19,80,602 14,06,861 5,73,741 71.03 28.97
NCT OF DELHI 1,67,53,235 4,19,319 1,63,33,916 2.5 97.5
ORISSA 4,19,47,358 3,49,51,234 69,96,124 83.32 16.68
PUDUCHERRY 12,44,464 3,94,341 8,50,123 31.69 68.31
PUNJAB 2,77,04,236 1,73,16,800 1,03,87,436 62.51 37.49
RAJASTHAN 6,86,21,012 5,15,40,236 1,70,80,776 75.11 24.89
SIKKIM 6,07,688 4,55,962 1,51,726 75.03 24.97
TAMIL NADU 7,21,38,958 3,71,89,229 3,49,49,729 51.55 48.45
TRIPURA 36,71,032 27,10,051 9,60,981 73.82 26.18
UTTAR PRADESH 19,95,81,477 15,51,11,022 4,44,70,455 77.72 22.28
UTTARAKHAND 1,01,16,752 70,25,583 30,91,169 69.45 30.55
WEST BENGAL 9,13,47,736 6,22,13,676 2,91,34,060 68.11 31.89

 

 

 

 

 

Age Structure:

 

Age- sex structure is one of the most important characteristics of population composition. Almost all population characteristics vary significantly with age.

Information is included by sex and age group (0-14 years, 15-64 years, 65 years and over). The age structure of a population affects a nation’s key socioeconomic issues. Countries with young populations (high percentage under age 15) need to invest more in schools, while countries with older populations (high percentage ages 65 and over) need to invest more in the health sector. The age structure can also be used to help predict potential political issues. For example, the rapid growth of a young adult population unable to find employment can lead to unrest.

Below is the age structure of India:

 

 

0-14 years: 27.71% (male 186,420,229/female 164,611,755)
15-24 years: 17.99% (male 121,009,850/female 106,916,692)
25-54 years: 40.91% (male 267,203,029/female 251,070,105)
55-64 years: 7.3% (male 46,398,574/female 46,105,489)
65 years and over: 6.09% (male 36,549,003/female 40,598,872) (2016 est.)

 

 

Sex Ratio:

Sex ratio is used to describe the number of females per 1000 of males. Sex ratio is a valuable source for finding the population of women in India and what is the ratio of women to that of men in India.

In the Population Census of 2011 it was revealed that the population ratio in India 2011 is 940 females per 1000 of males. The Sex Ratio 2011 shows an upward trend from the census 2001 data. Census 2001 revealed that there were 933 females to that of 1000 males.

While Kerala with sex ratio of 1084 top the list, Daman and Diu with sex ratio of 618 is at the bottom of the list.

Below is the list of states according to the sex ration. In the list we can see the states with good sex ratio.

 

    2011 Census
S.No. State Sex Ratio Child Sexratio
India 943 919
1 Kerala 1084 964
2 Puducherry 1037 967
3 Tamil Nadu 996 943
4 Andhra Pradesh 993 939
5 Chhattisgarh 991 969
6 Meghalaya 989 970
7 Manipur 985 930
8 Orissa 979 941
9 Mizoram 976 970